Can WiFi channel be set for WPA4220 / PA-411 series?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can WiFi channel be set for WPA4220 / PA-411 series?
Model :
Hardware Version : TL-WPA4200KIT
Firmware Version : 1.1.0.844 and 1.0.0.337
I have a sender + receiver from TL-WPA4200KIT, version 1.0 - later, I added and extra receiver, PA-411. These are set to broadcast WiFi that is used for a couple of phones, and a couple of tablets. I know these are a bit old, but they seem to do the job.
Using a Windows 10 program, I can see that the TP-Link devices send over 2.4GHz and it appears that this uses channel 1. On my Asus Transformer tablet (Windows 10), the connection speed is 150Mbps. The 5GHz band isn't used.
I would like to change the channel to 6, but I can't locate any TP-Link utilities that will let me do that. Any ideas?
Hardware Version : TL-WPA4200KIT
Firmware Version : 1.1.0.844 and 1.0.0.337
I have a sender + receiver from TL-WPA4200KIT, version 1.0 - later, I added and extra receiver, PA-411. These are set to broadcast WiFi that is used for a couple of phones, and a couple of tablets. I know these are a bit old, but they seem to do the job.
Using a Windows 10 program, I can see that the TP-Link devices send over 2.4GHz and it appears that this uses channel 1. On my Asus Transformer tablet (Windows 10), the connection speed is 150Mbps. The 5GHz band isn't used.
I would like to change the channel to 6, but I can't locate any TP-Link utilities that will let me do that. Any ideas?