TL-MR6400 Blank\white pages

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

TL-MR6400 Blank\white pages

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-MR6400 Blank\white pages
TL-MR6400 Blank\white pages
2017-05-02 18:04:47
Model :

Hardware Version :

Firmware Version :

ISP :

Hi Everybody

I have a TL-MR6400 and only a few pages are blank\white. The tabs\pages are Status, network, LTE Dialup, LTE, Data settings, PIN Management. All other tabs\pages are fine

I did load old and new firmware
Also did reset router twice

Sim card in router

Look at photos
File:
pic1.jpgDownload
pic2.jpgDownload
pic3.jpgDownload
pic4.jpgDownload
pic5.jpgDownload
  0      
  0      
#1
Options
15 Reply
Re:TL-MR6400 Blank\white pages
2017-05-03 19:32:46
thank you very much :D
  0  
  0  
#2
Options
Similar Problem
2017-05-31 20:25:41
I'm getting a blank page for Network - LTE Dial up so can't change my profile.

Was this issue resolved?

It was working this morning but has now vanished.
  0  
  0  
#3
Options
Problem still not resolved
2017-06-01 19:01:22
Problem still not resolved
  0  
  0  
#4
Options
TL-MR6400 connection Problem
2017-06-29 06:15:57
Have this same problem WiFi working fine Lan too but not connection with 3G/LTE

Any solution? please
  0  
  0  
#5
Options
Re:TL-MR6400 Blank\white pages
2017-06-29 14:41:32

yuu666 wrote

Have this same problem WiFi working fine Lan too but not connection with 3G/LTE

Any solution? please


Hi yuu666, the issue we were suffering with was blank pages. The function of the router was fine, 3G/4G was working just couldn't alter anything on the Dial-up tab.

Update: I spoke with Tech support for an hour and they sent me a new version of firmware to try. Following the installation of this, my router turned into a brick... I now have a TP Archer MR200 and couldn't be happier...
  0  
  0  
#6
Options
Re:TL-MR6400 Blank\white pages
2017-07-02 12:40:30

JRJakkals wrote

Problem still not resolved


Did you try a different web browser or a hard reset on the router?
  0  
  0  
#7
Options
Re:TL-MR6400 Blank\white pages
2017-10-07 03:07:57
did you solve this? i experience the same problem, think it might be because i flashed the v1 firmware when i actually have version 2. I`ve tried to upload different firmware with recovery method using tftp and it transfers the bin file but after router has rebooted nothing has changed and the old firmware version is the same.
  0  
  0  
#8
Options
Re:TL-MR6400 Blank\white pages
2017-10-08 19:27:57
No resolution to my issue as the router was bricked by the prototype firmware installation. Router swapped out by TP. New router MR200 working well.
  0  
  0  
#9
Options
Re:TL-MR6400 Blank\white pages
2017-10-09 04:56:45
Anyone have MR6400 V1 and V2 stripped firmware?
  0  
  0  
#10
Options
Re:TL-MR6400 Blank\white pages
2017-10-22 19:00:25
I have the same problem. I tried to TFTP just the router.bin via renaming to mr6400_tp_recovery.bin (of firmware 170330) and I could see the "new logo" backend ov V2. But there are the same White pages if I try to configure 4G Connection. And also updates with the web backend are not possible.

It's not possible to successfully install any full Firmware via TFTP. Uploading works fine but after rebooting nothing happened. Still the same blank page issues.

Is there any support from TP Link or should I throw the device in the waste? Is it bricked now? Redirection to firmware upgrade page in Switzerland is a trap!!! ( http://www.tp-link.com/at/download/TL-MR6400.html) There's just a v1 upgrade and no option to select v2 so I thought I'm downloading the right Version. That really really sucks!
  0  
  0  
#11
Options