Deco web interface login

Released On: 2022-07-19 08:18:26Last update time: 2022-10-25 03:31:29

This article will show the various menus and data that the Deco web UI can provide. One point I would like to stress is that the Deco UI is not the same as a router UI. Do not expect to be able to the same configurations in the Deco that you can do in the Deco app.

The Deco UI offers a general status of your network, as well as the ability to update the firmware manually which the app can not do. Other than that, you will still be using the Deco app for any configuration needs.

 

Login Page (Default IP is  http://tplinkdeco.net or http://192.168.68.1)

The login password is the same as the password of the Deco APP login.

Network Map (first page seen when logging in) – Shows information about your Deco, Wi-Fi network, and CPU performance

Network Map > Internet – shows your WAN connection type, and the public IP your Deco has

Network Map > Clients – you can see all connected clients from all Deco units or single out a specific Deco, the speeds the devices are using, and how the clients are connected

Advanced > Status – you can see the networking information for the WAN, LAN, and the wireless SSID

Advanced > System > Firmware Upgrade – you can manually upload the firmware, or you can tell the Deco to update to the latest firmware over the internet

Advanced > System > System Log – you can see various types of logs from network connection to critical system errors and export them to your computer

Advanced > System > Time Settings - you can configure the region the Deco is located so the system can sync the appropriate time

Advanced > System > Reboot – you can reboot a specific Deco unit, or you can reboot the entire network

Advanced > System > System parameters

3
Comment

Forgot login password

Is it possible to change my email address for my account?

Al momento de dar de alta el Deco no coloque el nombre de la red como una contraseña, hay forma de colocar nombre y contraseña de la red?

 

Hello, I'm using 34 Decos across 4 different locations. At one location, I'm experiencing an issue with the web interface. The main Deco there is an X50 Outdoor (firmware version 1.2.5 Build 20231121 Rel. 68541). When I go to the Deco's web page (192.168.1.175 in my case), I'm automatically redirected to index.html#networkMap, but then the Deco 'freezes' immediately: It continues to work, but I can't proceed beyond this screen. Clicking 'Advanced' also doesn't work (as if the screen is blocked until the first page is loaded). Is there a way to manually enter another link to access the 'advanced' menu? How can I resolve this? Simply restarting doesn't work; the problem remains the same (freezing on the main page).

 

Can you help?  Only 2 of my 3 routers are working.  The 3rd one flashes blue????

Gujuu is a good 😊 😊 😊 and you have to go back with 

hola de mis redes creadas solo puedo visualizar 7 en el aplicativo deco como puedo encontrar las demas porfavor me ayudan

saludos

upload
    upload