MR200 WAN dynamic ip

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MR200 WAN dynamic ip

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MR200 WAN dynamic ip
MR200 WAN dynamic ip
2017-09-15 18:20:17
Model :

Hardware Version :

Firmware Version :

ISP :

Hello,
I have a problem to configure WAN PORT to obtain IP from external DHCP. (Dynamic IP)
Router try to connect whitout success.
In Static IP all work fine.

MR200 V1
Firmware: Archer MR200(EU)_V1_160905

tnx in advance
Roby
  0      
  0      
#1
Options
2 Reply
Re:MR200 WAN dynamic ip
2017-09-26 16:34:43
If you connect the WAN cable to your PC, do you need to set up Static IP to get internet as well? If yes, then it is normal that the MR200 needs static IP as well.
But if your PC can get IP automatically(Dynamic), then can clone the Ethernet MAC address of the PC to the MR200, then see if the MR200 can get the IP address.
  0  
  0  
#2
Options
Re:MR200 WAN dynamic ip
2017-11-17 03:30:14
Thanks for answer
If I use 3G/4G connection WAN port, the router get IP correctly from ISP on the WAN side; but if I use WAN Ethernet port connected to ISP (3G/4G for backup) this port no obtain IP fron DHCP server.

Roby
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1027

Replies: 2

Related Articles