Archer MR200: Wrong IP reported to Dynamic DNS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR200: Wrong IP reported to Dynamic DNS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR200: Wrong IP reported to Dynamic DNS
Archer MR200: Wrong IP reported to Dynamic DNS
2019-07-04 16:07:52

I use no-ip.com service to connect to some services at my home. My Archer MR200 4G router updates my Dynamic DNS with IP address which shows up on "What's my ip", but that one doesn't connect to my home. When I manually point the no-ip address to the IP shown on the Internet overview page in thw router, it works.

Is there any solution how to report this correct IP? My previous Netgear router did it the right way.

  1      
  1      
#1
Options
5 Reply
Re:Archer MR200: Wrong IP reported to Dynamic DNS
2019-07-05 10:52:32

Hi,

 

What do you mean that the router updates the DDNS with IP address but cannot connect to your home? 

 

At that time, can you access the MR200 with the domain name? If not, is there any error message? Please show us a screenshot.

 

How do you point the NO-IP address to the IP manually? By login manually? 

 

Besides, please ensure that the firmware is up to date. 

https://www.tp-link.com/support/download/archer-mr200/#Firmware 

 

Good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Re:Archer MR200: Wrong IP reported to Dynamic DNS
2019-07-05 11:02:18

What I mean is that the outer IP is 72.xxxx and on that one I get no answer from my network. On the Internet page it shows modem's IP as 10.xxx. The 10something IP is the one I can use with NAT to access my services or VPN to.

  0  
  0  
#3
Options
Re:Re:Archer MR200: Wrong IP reported to Dynamic DNS
2019-07-05 11:03:49 - last edited 2019-07-05 14:20:30

Yes, you can update the IP manually on No-ip.com. But if the modem restarts, you get new IP and it autoupdates the dynamic dns to wrong IP. 

I'm on the latest firmware.

  0  
  0  
#4
Options
Re:Archer MR200: Wrong IP reported to Dynamic DNS
2021-04-28 12:35:43 - last edited 2021-04-28 12:36:58

I am having the same issue.

 

Status page shows WAN IP: 100.92.228.4

 

But the Archer software automaically tells the Dynamic DNS service that the IP is 188.146.227.177.

 

Also, when I go to google and ask for my IP it also shows 188.146.227.177.

 

For some reason the Archer router hides the actual WAN IP and gives me a different one, which doesn't work.

 

Only using IP 100.92.228.4 works, therefore I am unable to leverage the Dynamic DNS options.

 

  0  
  0  
#5
Options
Re:Archer MR200: Wrong IP reported to Dynamic DNS
2021-04-28 13:43:17

@Turowicz I think it is an ISP thing. I had the same, now it works just by autoupdate to DynDNS done by the modem. Before I had extermal IP reported by the modem (and google, whoami,...) and the IP shown in the connection info inthe modem UI.

If I accessed the reported IP, couldn't reach my network from outside when using other ISP in my mobile, than I have the modem on. On second sim/other provider the reported IP worked. 

 

So as I say... ISP?

  0  
  0  
#6
Options

Information

Helpful: 1

Views: 3858

Replies: 5

Related Articles