T9UH disconnects ever so often + driver question
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.T9UH disconnects ever so often + driver question
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Version :
Firmware Version :
ISP :
my T9UH adapter's connections brakes for a few seconds ever so often, I wonder if anyone have seen this problem and has a solution.
Windows 10 Education, i7-4770HQ driver.
also the driver from official website gives a setup.exe from 10/31/2016 that installs a driver from 12/10/2015, and if I run 'search automatically online for update' it will change to a 4/1/2016 version. Which one should I be using?
(the brakes happen on 12/10/2015 driver, trying 2016 for now)
update:
2016 driver still disconnects, most frequent being twice within 15min and other times it's fine for hours.
I found another 'Archer T9UH(EUUS)_V2_170823_windows' that gives a 7/25/2017 setup.exe but the exe doesn't work, agree to 'allow the app to make changes' and then nothing happens. same applies for 5/16/2017 version of 170623 driver.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Ok.. just incase anyone else reads this in the future, I managed to fix the problem.
To clarify... my problem was that my t9uh would often drop to only 128mb/s (16MB/s) to 192mb/s when copying files across my local network, to another hard wired machine.
If I reinstalled the driver, it appeared to fix the problem for a while, only to slow down again a few days later.
I have since used a driver update program to update ALL of my drivers on the PC, including the underlying USB root/hub driver, and this appears to have fixed the problem.
It has been many days and I am now still getting max speeds (80-90 MB/s file copies) across the network.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Try this unofficial one I packed. Fixed all issues with my T4UH on Windows 10, and should support the chip (Realtek RTL8814AU) in the T9UH. I'd love to find out if it works. :)
- Copy Link
- Report Inappropriate Content
johnb_xp wrote
http://forum.tp-link.com/showthread.php?101991-Archer-T4UH-V1-T4UH-V2-T9UH-Driver-Unofficial-Version-171121-Windows-32-and-64-bit
Try this unofficial one I packed. Fixed all issues with my T4UH on Windows 10, and should support the chip (Realtek RTL8814AU) in the T9UH. I'd love to find out if it works. :)
It works for T9UH.
Connection speed wise there's a 10% increase then the Oct.2016 driver. Disconnection is random so I'll wait and see, so far it's good.
Great work, tplink should pay you for this.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yet again... same thing happened today.
Found a driver that appeared to work, and 'survived' several reboots. Immediately got 80-90 MB/s whilst copying files across the LAN.
3 days later.. even this driver now suddenly is capped at 24MB/s. Simply reinstalled the driver, and back up to full speed again.
Checking device manager, it doesn't look like windows did a sneaky driver update inbetween,.. I'm basically installing the same driver every 2-3 days just to keep my intranet speeds at full whack.
No idea what is causing this.
- Copy Link
- Report Inappropriate Content
Hello,
Did you copy the file between two devices through the wireless connection? Or one is in the wireless connection, another one is in the wired connection?
How about the speed of copy files on other devices? You can do a comparison.
Have you tried to change the wireless channel and channel width on the router? Does the issue happen when connecting to the 2.4G wifi or 5G wifi?
In case the driver update automatically, you can turn off the automatic update function on the computer.
Finally, try to use the adapter on another computer and test.
- Copy Link
- Report Inappropriate Content
Ok.. just incase anyone else reads this in the future, I managed to fix the problem.
To clarify... my problem was that my t9uh would often drop to only 128mb/s (16MB/s) to 192mb/s when copying files across my local network, to another hard wired machine.
If I reinstalled the driver, it appeared to fix the problem for a while, only to slow down again a few days later.
I have since used a driver update program to update ALL of my drivers on the PC, including the underlying USB root/hub driver, and this appears to have fixed the problem.
It has been many days and I am now still getting max speeds (80-90 MB/s file copies) across the network.
- Copy Link
- Report Inappropriate Content
Thanks for your reply, glad to hear that you figured it out finally.
If need any further help, do not hesitate to contact us.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6722
Replies: 11
Voters 0
No one has voted for it yet.