Any PoE splitters tested?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Any PoE splitters tested?
Model : Deco M5
Hardware Version :
Firmware Version :
ISP :
Hi,
It would be very useful to run the APs with an Ethernet backhaul coupled with PoE.
I see that the Deco units are specified at 12v 1.2A and the only splitter that TP-Link provide is rated only at 1.0A
Interestingly most of the TP-Link unmanaged switches (this is for home use) provide up to 15.4 Watts per port.
Will the TP-Link PoE splitter work, or should I look for something with better power margin?
Any suggestions? If there is a splitter with a USB Type C cable to connect directly to the Deco unit even better! (This is for the UK).
I would be using TP-Link switches providing PoE.
Thanks.
Hardware Version :
Firmware Version :
ISP :
Hi,
It would be very useful to run the APs with an Ethernet backhaul coupled with PoE.
I see that the Deco units are specified at 12v 1.2A and the only splitter that TP-Link provide is rated only at 1.0A
Interestingly most of the TP-Link unmanaged switches (this is for home use) provide up to 15.4 Watts per port.
Will the TP-Link PoE splitter work, or should I look for something with better power margin?
Any suggestions? If there is a splitter with a USB Type C cable to connect directly to the Deco unit even better! (This is for the UK).
I would be using TP-Link switches providing PoE.
Thanks.
