Model :

Hardware Version :

Firmware Version :

ISP :

Hallo there,
I have a main modem/router tplink VR400 and bought a secont tp link router (no modem) AC1200.
Followed instructions provided by tp link but the access point it does not provide internet.
Here is what i did on VR400 modem router:
Connect modem VR400 to internet (works fine)
Disabled wifi on VR 400
Enabled DHCP server on VR400 (192.168.1.100 - 192.168.1.200)
Gateway IP is 192.168.1.1 on VR400

For AC1200:
connected via ethernet to web interface of AC1200
setup AC1200 as instruction say (set IP address as 192.168.1.101)
reboot
disable DHCP on AC1200
setup wifi

but No internet
modem/router is connected via LAN ethernet port to AC1200 (LAN port again, no WAN)
on AC1200 the problem is at no IP address (0.0.0.0) for "network", "internet" tab, it does not see the net
IP selection is set at Dynamic at the same tab

what to do now?

Thank you,

Achilleas