Archer VR900 v2 no LEDS
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer VR900 v2 no LEDS
Model :
Hardware Version :
Firmware Version :
ISP :
This is a brand new "straight out of the box" unit that I am attempting to set up. On power-on all the LEDs light up briefly then all bar the Power LED go out. About a half-second later, the Power LED also goes out and the unit is comletely unresponsive.
I'm assuming it's dead faulty stock from the supplier but before I pack it up and send it back I thought I'd post and see if anyone has experienced somethingh similar?
Hardware Version :
Firmware Version :
ISP :
This is a brand new "straight out of the box" unit that I am attempting to set up. On power-on all the LEDs light up briefly then all bar the Power LED go out. About a half-second later, the Power LED also goes out and the unit is comletely unresponsive.
I'm assuming it's dead faulty stock from the supplier but before I pack it up and send it back I thought I'd post and see if anyone has experienced somethingh similar?