Archer T6E wont connect to 5Ghz AC-Wifi
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer T6E wont connect to 5Ghz AC-Wifi
Model :
Hardware Version :
Firmware Version :
ISP :
Hi
we are using several TP-LINK Archer T6E AC1300 Dual Band PCIe Cards with a Broadcom Wireless 802.11ac chip.They should have a maximum throughput of 867MBit/s-5GHz, 400MBit/s-2,4GHz, 802.11ac/a/b/g/n
Windows 10 (1803) 64-Bit only shows a connection type of 802.11n and the maximum connection speed in most times is only 78Mbit/s only sometimes 130Mbit/s.
We tried different drivers and settings on the card, but its always the same and we are not able to use 5Ghz Connections.
But it would available because other devices in our corporate wifi can connect easily in AC-Mode to the APs.
We tried 7.35.338.0, 7.35.340.0, 7.35.352.0 but you cannot see or connet to the 5Ghz WiFi.
Any Ideas?
Regards
Peter
Hardware Version :
Firmware Version :
ISP :
Hi
we are using several TP-LINK Archer T6E AC1300 Dual Band PCIe Cards with a Broadcom Wireless 802.11ac chip.They should have a maximum throughput of 867MBit/s-5GHz, 400MBit/s-2,4GHz, 802.11ac/a/b/g/n
Windows 10 (1803) 64-Bit only shows a connection type of 802.11n and the maximum connection speed in most times is only 78Mbit/s only sometimes 130Mbit/s.
We tried different drivers and settings on the card, but its always the same and we are not able to use 5Ghz Connections.
But it would available because other devices in our corporate wifi can connect easily in AC-Mode to the APs.
We tried 7.35.338.0, 7.35.340.0, 7.35.352.0 but you cannot see or connet to the 5Ghz WiFi.
Any Ideas?
Regards
Peter