M5 Feature Request
M5 Feature Request:
Please add the ability the add a local domain name in the network setup
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
McKeith wrote
M5 Feature Request:
Please add the ability the add a local domain name in the network setup
Thanks
Hi,
Can I say that it is suggested to add the local domain name in the network setup so that you customers can configure Deco via web UI as well, except Deco app?
If I did not get your point, please correct me.
Good day.
- Copy Link
- Report Inappropriate Content
I would like to have the ability to create "Read-Only" accounts to allow my kids to see their WiFi time usage or any other feature to help them see what is their actual WiFi usage and their limits.
- Copy Link
- Report Inappropriate Content
Kwato wrote
I would like to have the ability to create "Read-Only" accounts to allow my kids to see their WiFi time usage or any other feature to help them see what is their actual WiFi usage and their limits.
Hi,
Except ownder account, manage account is available on Kasa app now.
Below is the instruction to set it up.
https://www.tp-link.com/en/support/faq/1597/
Regarding to the difference between it and owner account:
https://www.tp-link.com/en/support/faq/1444/
May it help.
Good day.
- Copy Link
- Report Inappropriate Content
Hello
here some feature requests:
- a checkbox to deactivate dhcp-server
- a checkbox to forward dhcp-request to another dhcp-server
- a combobox to set a local domain name, e.g. mylan.local
- a view where my client is connected to (which deco)
- a view with connection speed and the used protocol
Sorry for my bad english.
Greetings
Holger
- Copy Link
- Report Inappropriate Content
Hi,
Noted, we will forward it to our R&D colleagues.
Meanwhile, the Deco supports access point mode, if you want to deactive DHCP server, you can set it up AP mode.
Good day.
Holger wrote
Hello
here some feature requests:
- a checkbox to deactivate dhcp-server
- a checkbox to forward dhcp-request to another dhcp-server
- a combobox to set a local domain name, e.g. mylan.local
- a view where my client is connected to (which deco)
- a view with connection speed and the used protocol
- Copy Link
- Report Inappropriate Content
Hello Kevin_Z
i use my decos in AP mode but without the security features.
If i will use the features i have to activate router mode with dhcp-server enabled.
This is the problem. I have a raspberry pi which will act as dns and dhcp-server
- Copy Link
- Report Inappropriate Content
Hi,
I see.
Yes, you are right, with AP mode enabled, security settings will be invalid on deco app. And you may need to do the secrurity settings on your front end device that feeds the deco since DHCP has been disable on Deco M5 when it is in AP mode.
So, if you need to keep security settings availabl, please let it stay on router mode.
As for your requests, we will think highly of it and forward it to our R&D. They will assess. Any update, we will release firmware on your deco app.
Good day!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1549
Replies: 7
Voters 0
No one has voted for it yet.