Deco P7 slave unit always offline
I only got the deco p7(2 units) a few weeks ago. Everything working great for first couple of weeks but now the slave p7 is intermittently showing as offline. The setup is modem > p7 > p7. The 2 p7s aren't very far away from each other. I also have power line plugs going from the slave p7 to my home alarm. The home alarm still appears to be connected to the network fine when the slave p7 is showing as offline
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I also have issue with devices dropping off the WiFi, both 2.4ghz and 5ghz devices. It just seems very unreliable in general
- Copy Link
- Report Inappropriate Content
So the current network topology is modem -- Deco P7 )))(((Slave Deco P7 -- home plug 1--powerline--home plug 2--home alarm?--- means wired cable )))((( means wireless.
What is the light status of the slave Deco when it shows disconnected from other Decos?
At that moment, please connect your computer to the slave Deco P7 directly and click here to check its IP address and default gateway.
Meanwhile, how do you make it back to work? Power cycle it or wait a while to make it work automatically?
Have you ever tried to change another sockets to plug it or swap the locations of those 2 Deco P7.
Click here to setup the Slave Deco to be the Main Deco.
- Copy Link
- Report Inappropriate Content
Maybe I'm misunderstanding but aren't the deco p7s connected over powerline, isn't that their main feature compared to m5/m9 devices. So when you say 'Deco P7 )))(((Slave Deco P7' that doesn't seem right
Anyway the light on both p7s is always green regardless of their online status in the app. Last night I rebooted the main p7 through the app and this seems to have resolved the issues. All devices can connect fine now.
When this happens again and I connect a pc directly to the slave p7 with an ethernet cable what should I expect to see for the IP address and default gateway? Should it be different to the current default gateway(192.168.0.x)?
Edit: So the slave deco is showing offline again now. It seems that when I go into the room with the slave p7 this is when it starts showing as offline in the app. I'm guessing it might be something to do with the fact my device is no longer connected to the main p7. Is this normal?
- Copy Link
- Report Inappropriate Content
6 months later and I still have this issue with my slave p7 intermittently showing as offline and wireless devices reverting to the main p7(Updates to the app now indicate which p7 a device is connected to). Does anyone else have this issue? I'm wondering if the overall signal strength coming into the main p7 from the modem is a factor because my wired devices are all fine like my home alarm as mentioned in original post and it seems like this could be only happening during high contention periods like evenings and weekends. I did try running a speed test when this issue occurs and it's always giving me the same results around 240mbps down and 25mbps up. Another possibility is perhaps there is too many devices connected to the slave p7(max 12 during busy periods), it does feel quite warm to the touch especially when streaming from my nas box(wired)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1545
Replies: 4
Voters 0
No one has voted for it yet.