Home Network Community > All Threads > AC750 Wi-Fi Travel Router (TL-WR902AC) no access
< All Threads

AC750 Wi-Fi Travel Router (TL-WR902AC) no access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AC750 Wi-Fi Travel Router (TL-WR902AC) no access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC750 Wi-Fi Travel Router (TL-WR902AC) no access
AC750 Wi-Fi Travel Router (TL-WR902AC) no access
2019-07-31 15:17:25

Hello,


I have bought the Amazon AC750 Wi-Fi Travel Router (TL-WR902AC) and just connected.

 

I have in my network already an Ethernet router (gateway) with the IP 192.168.0.1 also I have given to the computers fixed IP numbers.
So I come with the 192.168.0.1 not on the Travel Router and also with the IP 192.168.1.1 I get no connection. According to instructions one should specify in the net "automatic IP allocation", but that does not work with my firm IPs.
The manual is unfortunately not very detailed.


Is there still a possibility to come to the Travel Router despite fixed IP allocation?


I just wanted to connect the Travel Router via Ethernet cable to the main router / gateway so I have a WiFi access point in the other room.
Is this with the product at all or do I need another product?


thank you in advance
Gersh

  0      
 
  0      
 
#1
Options
1 Reply
Re:AC750 Wi-Fi Travel Router (TL-WR902AC) no access
2019-08-01 02:19:00

@Gersh 

 

So you want to connect the 902AC to the existing router by ethernet cable to extend the wifi range?

 

There are 2 operation modes you can select: wireless router mode and access point mode;

 

For the wireless router mode, cause the LAN IP of the main router is also 192.168.0.1, to avoid IP conflict, we need change the LAN IP of 902AC to another subnet, like 192.168.1.1; and the IP of devices connected to the 902AC will be assigned by itself, not the main router.

 

For the access point mode, you can setup a static IP for it, or you can leave it with smart DHCP enabled. All the devices connected to the internet will be managed by the main router directly.

 

Below are the instructions:

https://www.tp-link.com/support/faq/2028/ wireless router mode 

https://www.tp-link.com/support/faq/2029/ access point mode

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 3168

Replies: 1

Related Articles
AC750 Wi-Fi Travel Router TL-WR902AC
470 0
TL-WR902AC Travel Router - Power Requirements
3615 0
AC750 Wi-Fi Travel Router Model No. TL-WR902AC Ver. 3
1324 0
Ethernet Icon NO INTERNET for TL-WR902AC Travel Router
3136 0
use TL-WR902AC Travel Router with USB printer
172 0
Configuration of travel router TL-WR902AC
689 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.