Port Forwarding problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Port Forwarding problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Port Forwarding problem
Port Forwarding problem
2019-08-07 03:19:50

HI!

My scenario is this! I have created local FTP server on my PC. All local devices can access it nicely by goint to ftp://192.168.0.112. But if a computer from another network wants to access through Internet then port forwarding is necessary. I have tried to forward my ip address (router's ip address which is 103.214.159.110) in here:

 

settings:

BUT I GET THIS ERROR:

 

  0      
  0      
#1
Options
2 Reply
Re:Port Forwarding problem
2019-08-07 03:34:34

@Sandip 

 

The IP address need to be entered is not the internet IP address, instead, it is the IP address of the local FTP server, like 192.168.0.112. 

 

You can click here to get more instructions to setup port forwarding/virtual server. 

 

May it help and have a nice day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  2  
  2  
#2
Options
Re:Re:Port Forwarding problem
2019-08-07 15:04:01
Kevin_Z is correct that you need to use the 192.168.0.112. You use the 103.214.159.110 internet IP or a DDNS service and the port number to address your device from outside your network. You should also set up address reservation of your local IP of 192.168.0.112 to the MAC address of your PC so the PC is always assigned that IP.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1600

Replies: 2

Related Articles