WDS Bridging between my new Archer C1200 to my old/slave TL-Wr1043ND v1.8 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WDS Bridging between my new Archer C1200 to my old/slave TL-Wr1043ND v1.8 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WDS Bridging between my new Archer C1200 to my old/slave TL-Wr1043ND v1.8 router
WDS Bridging between my new Archer C1200 to my old/slave TL-Wr1043ND v1.8 router
2019-09-15 22:09:27 - last edited 2019-09-19 06:52:07
Model: TL-WR1043N  
Hardware Version: V1
Firmware Version: 3.13.15 Build 140319 Rel.41339n

Hi,

 

I am trying to use the WDS bridging option on my TL-Wr1043ND v1.8 router to make it the slave router and connect to my new Archer C1200. I have followed this guide https://www.tp-link.com/us/support/faq/440/ and rebooted my router at the very end. Now I can connect to the slave router but it will not have an internet connection to it, so it doesn't work. I don't know what to do, I have googled and searched elsewhere but all I get are instructions to follow the same guide. I have tried live chat but it appears that although the option to talk is available, there is no one to talk to on a Sunday night. 

 

This page https://www.tp-link.com/us/support/faq/227/ says that even two routers by TP-Link may not be able to use WDS Bridging together but I have no idea if that is the case for me. 

 

Any help/guide/tips/troubleshooting will be very much appreciated, I have literally been at this since morning and it is now 11pm. 

 

Thanks

  0      
  0      
#1
Options
1 Accepted Solution
Re:WDS Bridging between my new Archer C1200 to my old/slave TL-Wr1043ND v1.8 router-Solution
2019-09-16 20:52:02 - last edited 2019-09-19 06:52:07
Thanks for the reply. After asking around I was entering the correct settings but it would not work. In the end I flashed dd-wrt and used the repeater bridge guide for Atheros devices and that worked for me.
Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:WDS Bridging between my new Archer C1200 to my old/slave TL-Wr1043ND v1.8 router
2019-09-16 05:36:44

@MiniYNWA 

 

Do you use the wireless password of Archer C1200 to configure the TL-WR1043ND as a repeater via the WDS bridging function? 

 

Have you ever changed the LAN IP address of TL-WR1043ND? 

 

With computer connected to the TL-WR1043ND, please click here to check the IP address and gateway. 

 

Besides, please ensure that the firmware is up to date.

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:WDS Bridging between my new Archer C1200 to my old/slave TL-Wr1043ND v1.8 router-Solution
2019-09-16 20:52:02 - last edited 2019-09-19 06:52:07
Thanks for the reply. After asking around I was entering the correct settings but it would not work. In the end I flashed dd-wrt and used the repeater bridge guide for Atheros devices and that worked for me.
Recommended Solution
  0  
  0  
#3
Options
Re:WDS Bridging between my new Archer C1200 to my old/slave TL-Wr1043ND v1.8 router
2019-09-19 06:51:50

@MiniYNWA 

 

Thanks for your reply, glad to hear that it works well now.

 

You can enjoy the internet with the 2 routers. 

 

Best regards. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 2990

Replies: 3

Related Articles