loosing speed between modem and router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HI, I just bought a new router yesteray: TP-LINK AC1350 and I have a problem with the speed, I tried to connect my internet company modem with a cable to my computer to be sure it wasnt a problem with my provider, so I do a speed test and I receive the proper speed I'm supposed to have (120 mbp) but then when i connect my computer to the router with a cable, the speed is 94 mbp instead of 120 and it's the same speed i have everywhere in the house,anyone have an idea how could fix that? thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, thanks for your reply.
The device is Archer C60. For your information, the AC1350 is the wireless link speed in PHY layer, not the actual speed, instead it has the 100Mbps ethernet ports.
https://www.tp-link.com/support/download/archer-c60/#specifications
In other word, it can handle up 100Mbps, that is the reason why the speed you get from the router won't be higher than 100Mbps.
If you just bought it, you can contact the retailer to get a router with gigabit ports, like Archer C7, Archer A7, Archer C9.
May it help and have a good day.
- Copy Link
- Report Inappropriate Content
@jessypaquette This is just a bump up as I am having the same issue with my C3150. I am losing about 1/3 of my speed. It used to hold the same as direct to modem but the last month I have been seeing less than 2/3 the overall speed I should be getting. I haven't changed any settings in mine.
- Copy Link
- Report Inappropriate Content
Hello, what is the model numbe rof the router? It starts with Archer.
Please show us a screenshot of the speed test with the computer connected to the TP-link router by wired cable and wireless to do further analysis.
Meanwhile, please verify its wired/wireless negotiation speed as the instruction: https://www.tp-link.com/support/faq/2265/
Note: For wired negotiation speed, it is the same; while you need right click on local area connection or ethernet.
What is the current hardware and firmware version of the router？
Besides, you can refer to the instruction below to narrow down the issue.
https://www.tp-link.com/support/faq/2170/
Thanks in advance, and have a nice day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
for the firmware, it’s latest one@Kevin_Z
- Copy Link
- Report Inappropriate Content
this is the speed test when connected with the modem 
and this is when i’m connect with the cable on the router 
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello, thanks for your reply.
The device is Archer C60. For your information, the AC1350 is the wireless link speed in PHY layer, not the actual speed, instead it has the 100Mbps ethernet ports.
https://www.tp-link.com/support/download/archer-c60/#specifications
In other word, it can handle up 100Mbps, that is the reason why the speed you get from the router won't be higher than 100Mbps.
If you just bought it, you can contact the retailer to get a router with gigabit ports, like Archer C7, Archer A7, Archer C9.
May it help and have a good day.
- Copy Link
- Report Inappropriate Content
i bought the archer c7 like you suggested but now i can have full speed but only on the computer that is plug to the router, when i use the wifi , the speed is so bad, i have 20 mbps instead of 130 and i dont live in a house, i live in a apartment.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2063
Replies: 8
Voters 0
No one has voted for it yet.