Log eror why?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Log eror why?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Log eror why?
Log eror why?
2019-11-05 10:22:02 - last edited 2019-11-05 10:26:09
Model: TD-W8961N  
Hardware Version: V3
Firmware Version: Firmware Version : 3.0.0 Build 170919 Rel.21648


System Log                 
          
          
1/1/2000 0:0:52> PAP Authentication Successful
1/1/2000 0:0:52> ppp_ready: ch:804e5094, iface:8040e98c
1/1/2000 0:0:52> PPP get IP Address:10.251.31.51
1/1/2000 0:0:52> PPP gateway:10.10.70.164
1/1/2000 0:0:52> PPP subnetmask:255.255.255.255
1/1/2000 0:0:52> PPP primary DNS:77.88.8.8
1/1/2000 0:0:52> PPP secondary DNS:77.88.8.1
1/1/2000 0:0:52> SNMP TRAP 3: link up
1/1/2000 0:0:52> Accept() fail
1/1/2000 0:1:7> Last errorlog repeat 1 Times
1/1/2000 0:1:7> sending request to NTP server(46)
1/1/2000 0:1:7> received from NTP server(46)
11/5/2019 9:47:45> Adjust time to 5dc14541
11/5/2019 9:47:45> adjtime task pause 1 day
11/5/2019 9:48:58> PPPoE: Recieve PADT
11/5/2019 9:49:27> PPPoE: Recieve PADO
11/5/2019 9:49:27> PPPoE: Recieve PADS
11/5/2019 10:8:21> PPPoE: Recieve PADO
11/5/2019 10:43:34> PPPoE: Recieve PADT
11/5/2019 12:14:28> Last errorlog repeat 9 Times
11/5/2019 12:14:28> PPPoE: Recieve PADO
11/5/2019 12:21:1> Last errorlog repeat 3 Times
11/5/2019 12:21:1> PPPoE: Recieve PADT
11/5/2019 12:56:55> PPPoE: Recieve PADO
11/5/2019 13:10:21> PPPoE: Recieve PADT
11/5/2019 13:43:20> Last errorlog repeat 6 Times
11/5/2019 13:43:20> PPPoE: Recieve PADO
11/5/2019 14:4:56> PPPoE: Recieve PADT

  0      
  0      
#1
Options
10 Reply
Re:Log eror why?
2019-11-06 07:00:41

@Yusif 

 

Hello, from the system log, it seems that the connection drops few times or the router tried to re-dial up the connection for a few times. 

 

May I know does it affect the actual performance? Like speed or stability? 

 

What is the led status of the TD-W8961N when you received the log error? 

 

Meanwhile, please ensure that the firmware is up to date. 

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Log eror why?
2019-11-06 07:05:21

@Kevin_Z why so?  my internet is working well and the line performance is also excellent.

  0  
  0  
#3
Options
Re:Log eror why?
2019-11-06 07:07:26
  0  
  0  
#4
Options
Re:Log eror why?
2019-11-07 09:57:05

@Yusif 

 

The log message need to be read with the specific symptom so that we can get what does it mean; per I said before, from the current log, it can be that the connection drops a few times or the router tries to re-dial up. 

 

And you mentioned that it does not affect the actual performance of the router, instead, it works well, you may ignore it.

 

And we will try to improve the log feature and make it more helpful.

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:Log eror why?
2019-11-07 16:34:24

@Kevin_Z yes internet works well no problem.  connection does not break.  but in system logs shows errors

  0  
  0  
#6
Options
Re:Log eror why?
2019-11-07 16:36:32 - last edited 2019-11-07 16:37:38
  0  
  0  
#7
Options
Re:Log eror why?
2019-11-11 08:26:15

@Yusif 

 

Hello, per I mentioned above, if the actual performance wouldn't be affected, you can ignore it.

 

And to get the exact meaning of the system log, we need combine it with the specific symptoms together. 

 

Besides, the TD-W8961N has been released for serveral years, some system log has not been improved. 

 

And we will keep wroking to improve the system log.

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:Log eror why?
2019-11-11 09:20:48

@Kevin_Z why then when I configure it It works well There are no errors in the log.  the next day errors appear?

  0  
  0  
#9
Options
Re:Log eror why?
2019-11-11 14:12:39

@Yusif can you make firmware that will not show an error? Tp link 8961N   EU

  0  
  0  
#10
Options
Re:Log eror why?
2019-11-12 09:04:10

@Yusif Hi I would like to know why the modem when the Internet is gone after the Internet appears in the modem does not automatically turn on, you have to turn it off and on, or click on the save button.  explain to me what kind of problems with these modems with your. not automatically logged in How the Internet works but does not log in automatically, you have to turn it off and on or click on the save button in the settings after the Internet appears with what it is connected?

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 2305

Replies: 10

Related Articles