TL-MR3020 disconnecting from ZTE MF667

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-MR3020 disconnecting from ZTE MF667

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-MR3020 disconnecting from ZTE MF667
TL-MR3020 disconnecting from ZTE MF667
2019-12-22 23:11:03
Model: TL-MR3020  
Hardware Version: V3
Firmware Version: 180907

After initial setup the device recognises the 3G/4G modem but after a moment it's status in "Internet > 3G/4G USB Modem:" goes to Unknown.

When I unplug the USB modem and plug it back in the router is detecting it and says it successfully connects and gives error code 80002 after which it restarts itself.

I asume the problem is in the modem itself but it is possible to have the wrong settings because I only used the quick setup.

  0      
  0      
#1
Options
4 Reply
Re:TL-MR3020 disconnecting from ZTE MF667
2019-12-24 11:38:59

@komunkulus 

 

When the TL-MR3020 stops working, please tell us the led status of it. 

 

At the same time, please plug the USB modem into the computer directly, bypass the TL-MR3020 and verify whether you can access internet from the USB dongle directly. 

 

Besides, you can try to create the network profile manually with the APN information. 

 

Go to advanced-network-internet page to set the Dial Number, APN, Username and Password manually.

 

May it help. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:TL-MR3020 disconnecting from ZTE MF667
2019-12-24 15:09:05

@Kevin_Z 
Hello, thank you for the quick reply.
I will assume the LED's indications are as follows:
power, 3G/4G signal, wi-fi signal, unknown (irrelevant)

 

When it stops only the power and wi-fi signal LEDs are on.

 

Right now it's stable and working as intended but that will probably change when I bring it back to the IP camera.

  0  
  0  
#3
Options
Re:TL-MR3020 disconnecting from ZTE MF667
2019-12-25 02:53:34

@komunkulus 

 

Thanks for your reply. 

 

You can take some time to test its performance; if it happens again, then try to create the connection profile manually with the APN information. 

 

Besides, you can adjust some wireless settings to improve its performance, like channel and channel width. 

 

Merry Christmas and have a happy new year. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:TL-MR3020 disconnecting from ZTE MF667
2021-12-29 07:56:14

@Kevin_Z Im using TL-MR3020 router the internet led keeps turning off every day suddenly, I have tried all troubleshooting steps & tried to switch router in all modes(3g/4g or WISP/AP mode ) nothing works.. there is no reply email from your customer care team!!!!

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1271

Replies: 4

Related Articles