Home Network Community > All Threads > Devices losing connection to Deco network
< All Threads

Devices losing connection to Deco network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Devices losing connection to Deco network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Devices losing connection to Deco network
Devices losing connection to Deco network
2020-01-01 13:30:12
Model: Deco P7  
Hardware Version:
Firmware Version: 1.3.1

Hello TP-Link community!

 

Couple of month ago we purchased the Deco P7 mesh network (set of 3). When it works, it works really well. Except we have one recurrent problem: devices randomly lose connection to the network. 

 

What happens:

 

- Device loses connection entirely.

- After a few seconds it tries to reconnect, however, the devices are often stuck on "verifying ip-adres" (sometimes for minutes). 

- Sometimes it even fails to reconnect (have to go WIFI and press connect again to the network to make it work).

 

The firmware is up-to-date. We tried reconfiguring the network (removed all decos with the main one factory reset). Played around in the settings as well (turned off 5GHz, network switch allocated static IP to Deco, turning on and off fast roaming/beam roaming).

 

Does anyone else faced similar issues or have any ideas how to fix this problem?

 

Regards,

 

Mark

  0      
 
  0      
 
#1
Options
2 Reply
Re:Devices losing connection to Deco network
2020-01-02 02:52:18

@Badope_Dutch 

 

Hello, Mark, we will do some troubleshooting first to locate this issue and try to fix it. 

 

1. What is the current network diagram? 

2. What is the led status of the Deco P7 when you lost connecttion? Can you get internet from it by wired cable connected?

3. Try to simplify the network diagram, connect the main Deco to the modem only and connect computer to the main Deco with other devices unplugged, after that, please check the network stability.

4. Try to set the slave Deco as main Deco to give it a go. https://www.tp-link.com/support/faq/2400/

 

Thanks in advance. And have a nice day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Devices losing connection to Deco network
2020-01-16 19:07:38

@Badope_Dutch I have similar issue as you and it started couple weeks ago. This is my post https://community.tp-link.com/en/home/forum/topic/187174?page=1

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1559

Replies: 2

Related Articles
Deco P7 - wireless devices losing internet connection
2253 0
New Deco M5 - devices losing connection
453 0
Devices losing connection to Deco network every 1-2 minutes
1612 0
AX6000 Losing connection to Devices
3452 6
Deco X60 - some devices keep losing internet connection
1004 2
Deco P7 keeps losing speed
866 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.