Home Network Community > All Threads > Will Deco M9+ extend BLE range for sensors on HomeKit?
< All Threads

Will Deco M9+ extend BLE range for sensors on HomeKit?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Will Deco M9+ extend BLE range for sensors on HomeKit?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Will Deco M9+ extend BLE range for sensors on HomeKit?
Will Deco M9+ extend BLE range for sensors on HomeKit?
2020-01-07 10:08:52
Model: Deco M9 Plus  
Hardware Version: V20
Firmware Version: Latest

Deco M9+ and the coming X20 provides three mesh networks: WiFi, BLE and ZigBee. Intuitively one should believe HomeKit BLE sensors would improve their range with the Deco system. However, HomeKit uses an Apple proprietary protocol, so this is not obvious, although HomeKit sensors benefit from normal WiFi routers. My experience with HomeKit is that the BLE range will increase with the use of one or more additional HomeKit base units in "Waiting mode", so BLE "daisy chaining" works with expensive Apple devices.

  1      
 
  1      
 
#1
Options
4 Reply
Re:Will Deco M9+ extend BLE range for sensors on HomeKit?
2020-01-08 01:45:51

@Buldre 

 

Hello, do you mean bluetooth by saying BLE? 

 

Below is the smart home devices compatibility list supported by Deco M9 plus, which we have confirmed. 

https://www.tp-link.com/Deco-M9-Plus/compatibility/ 

 

The Deco M9 plus does not support homekit yet.  

 

May it help. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Will Deco M9+ extend BLE range for sensors on HomeKit?
2020-01-08 07:31:01

@Kevin_Z 

 

None of these devices appears to use BLE/Bluetooth, although I have not deep dived into all devices' specs. Most devices made for HomeKit seems to use BLE (e.g. Elgato Eve, Fibaro, although WiFi is used too (e.g Netatmo Weather Station). Could you be more specific in your reply?

  0  
  0  
#3
Options
Re:Will Deco M9+ extend BLE range for sensors on HomeKit?
2020-01-08 07:41:57

@Kevin_Z 

 

All WiFi devices for HomeKit will be supported, so do you mean that the Deco has no "app" to let configuration be done from HomeKit, or router data be passed to the HomeKit base station?

 

My question was if the Bluetooth wireless network set up by the Deco would route BLE traffic between HomeKit devices. Would e.g. a Fibaro Switch be able to transfer its  measurements to an Apple TV and receive control signals the opposite way?

  0  
  0  
#4
Options
Re:Will Deco M9+ extend BLE range for sensors on HomeKit?
2020-01-11 10:31:45
I use Koogeek DW1 door sensors in Homekit but they use BLE and the connection is not stable enough. I have 3 Deco's M9 Plus and would like too use them to strengthen the BLE signal. Thus Homekit support yes please.
  0  
  0  
#5
Options

Information

Helpful: 1

Views: 2545

Replies: 4

Related Articles
Extend Deco M9 to garden office
2373 0
temperature sensors working with deco m9?
1210 1
Using Sensors setup in Deco with Google Home?
653 0
Extend M9 mesh with M4 or M5??
1349 0
Need to extend Range
689 0
Can I add RE305 to extend range of Deco M9 Plus router
3463 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.