Home Network Community > All Threads > How to connect Philips Hue to my Deco m9 ?
< All Threads

How to connect Philips Hue to my Deco m9 ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to connect Philips Hue to my Deco m9 ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to connect Philips Hue to my Deco m9 ?
How to connect Philips Hue to my Deco m9 ?
2020-01-15 21:30:31 - last edited 2020-01-16 00:22:40
Model: Deco M9 Plus  
Hardware Version:
Firmware Version: 1.3.0

Hello,

I would like to test the Hue feature that comes built-in the Deco M9 Plus kit I have.
For that I connected my Hue bridge to one of my Deco with an ethernet cable. Not sure if I had to do that, it was already wired on my switch connected to my Deco, but as it is documented ...

Then I follow the guide: https://www.tp-link.com/us/support/faq/1778/
 

I pressed on the button on my Hue bridge, then in the app I added Hue. But it is looking for a second then telling me that no Hue is found :(

I tried several times, no success.

Is there any updated procedure? Is it still a feature, maybe it is broken !

Thanks

Guillaume

  0      
 
  0      
 
#1
Options
2 Reply
Re:How to connect Philips Hue to my Deco m9 ?
2020-01-16 02:06:08

@GuiPoM 

 

Hello, connect a computer to the Deco via ethernet cable to rule out whether this LAN port is faulty. 

 

Then you can plug the Hue bridge back to the Ethernet port of Deco using an Ethernet cable and verify whether it works;

 

If still the same, try to reboot the Hue bridge and Deco; or you can change another ethernet ports and cables. 

 

May it help. 

 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:How to connect Philips Hue to my Deco m9 ?
2020-01-16 06:50:33

Hello @Kevin_Z ,

 

The Ethernet is obviously working because my Hue bridge is accessible and working. I can switch my light on and off from my smartphone and the only way the hub has to communicate is via Ethernet.

So there is no faulty port. 

 

What I have no tried yet is to switch the two ports, because I use both: one for my switch (not the Nintendo one ^^), the other for the Hue bridge.

 

Thanks

Guillaume

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 2246

Replies: 2

Related Articles
Problem with Deco M9 Plus and Philips Hue
1252 0
Philips Hue bulbs with Deco M9 Plus WITHOUT hue bridge
8604 0
Deco M9 Plus could not connect to Hue bridge
1895 0
Unable to Add Philips Hue to Deco M9 Plus
8180 0
Deco Philips Hue Light Groups
823 0
TP-Link Deco M9 Plus - Philips Hue Hub
727 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.