Home Network Community > All Threads > Enable Parental Controls / Access Control - Not Working (C50 v4)
< All Threads

Enable Parental Controls / Access Control - Not Working (C50 v4)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Enable Parental Controls / Access Control - Not Working (C50 v4)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Enable Parental Controls / Access Control - Not Working (C50 v4)
Enable Parental Controls / Access Control - Not Working (C50 v4)
2020-02-14 14:05:05 - last edited 2020-02-16 06:18:38
Model: AC50  
Hardware Version: V4
Firmware Version: 0.9.1 0.2 v0093.0 Build 190125 Rel.63783n(4555)

* Enable Parental Control

* Access Control Rule

 

Configure MAC Address to control internet traffic scheduling

 

When you configure to ALLOW traffic, ALL TRAFFIC are ALLOWED, schedule is USELESS

When you configure to DENY, ALL Traffic will be denied, rules and schedule are all USELESS

 

Temporary Solution:    Manual ON/Off  the "Parental Control"  

 

CC Techincal: Please send us the link for the updated version of the firmware for us to update specifically for "Parental Control".

 

  0      
 
  0      
 
#1
Options
5 Reply
Re:Enable Parental Controls / Access Control - Not Working (C50 v4)
2020-02-18 09:52:11

@Braveins 

 

Hello, below is the instruction to setup access control and parental control.

https://www.tp-link.com/support/faq/1723/ 

https://www.tp-link.com/support/faq/1724/

 

Meanwhile, may I know what is your network request? Do you want to block some devices to access internet? 

 

Besides, below is the download link of the firmware.

https://www.tp-link.com/support/download/archer-c50/#Firmware 

 

May it help. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Enable Parental Controls / Access Control - Not Working (C50 v4)
2020-02-18 12:48:56 - last edited 2020-02-19 11:35:07

@Kevin_Z 

 

Manual configuratio doesn't help...

 

The version of this model is not working...

 

I know how to configure however, the firmware version needs more improvement not just for display only.

 

Question:  Meanwhile, may I know what is your network request? Do you want to block some devices to access internet? 

 

Deny/Allow all access base on schedule, even simple Parental Control will not work at all.

 

When the config is Deny then all access to the internet will be denied regardless of schedule.

When the config is Allow then all access to the internet will be Allowed regardless of schedule.

 

Target: Deny/Alllow base on speciic time automatically.

 

 

 

  0  
  0  
#4
Options
Re:Enable Parental Controls / Access Control - Not Working (C50 v4)
2020-02-19 06:59:48

@Braveins 

 

You can choose one of them to block internet access at specific time.

 

For the parental control, you can add the devices you want to block into the parental control list and choose the time period; for the URL bar, if you want to block internet access, then do not enter any website; Then these devices won't be able to access internet during the specific time period. 

 

Or you can use access control to block internet as well; similarly, do not enter any keywords as allowed websites in the URL, then these devices won't get internet. 

 

If it still does not work, please describe how did you set them up; or you can show us some screenshots. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:Enable Parental Controls / Access Control - Not Working (C50 v4)
2020-02-19 11:36:54 - last edited 2020-02-21 03:26:02

@Kevin_Z 

 

Easy to say but the device is not working as intended.

 

I'm a IT/Network Engineer... I know very well the basic to advance config.

FYI: I'm using MAC Address to Allow/Deny on the config but no luck...

 

What I need you guys, is the upgraded version of Archer C50 v4 00000002. not V3

the available firmware on this link is obsolete, where the v5 or v4.x

 

 

 

 

Actual image of the device it's version 4(V4)

  0  
  0  
#6
Options
Re:Enable Parental Controls / Access Control - Not Working (C50 v4)
2020-10-02 04:18:29
Did you find a solution to this? I'm having the same problem with the same router.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1510

Replies: 5

Related Articles
Parental Control : enable temporary access to groups
629 0
parental controls
851 0
parental controls
598 0
Parental Controls for a public access Wifi
574 0
Setup timed access via Parental Controls
510 0
Parental Control / Access Control
643 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.