Archer MR600 - 4G Bands selection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123...

Archer MR600 - 4G Bands selection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR600 - 4G Bands selection
Archer MR600 - 4G Bands selection
2020-02-19 10:39:24 - last edited 2020-02-20 12:20:35
Model: Archer MR600  
Hardware Version:
Firmware Version:

Echoing millions of others request, where is the update firmware to choose specific 4g bands?????!!!!!??????

and also on 4g+ bands tο choose 2 bands together???? 

 

Without this function, this router perform so badly that sharing hotspot via smartphone yield similar result. Why do people still buy this product? (Yes, if you have not yet bought this product, DON'T)

 

And guys, people did research before they bought this product. Imagine what your customer will think when they realize this issue before their purchase? Do you still think people will choose your product while others like Huawei is readily available?

 

Please put this on first priority. We have been patiently waiting for months.

 

Thanks.

 

  11      
  11      
#1
Options
2 Accepted Solutions
Re:Archer MR600 - 4G Bands selection-Solution
2020-02-19 18:22:55 - last edited 2020-02-20 12:20:35

Already sold my router because of this issue and bought an Asus 4g-ac68u router.

Can select the band now and speed is working like it should.

 

I would have bought the Huawei b715 but external antennas are behind the router so that was a no go for me because of narrow space where the router is.

 

So long TP-link and thanks for nothing.

Seriously, like 6 months and no support for this issue?

Never gonna buy your products again. 

Recommended Solution
  7  
  7  
#2
Options
Re:Archer MR600 - 4G Bands selection-Solution
2020-09-08 03:49:40 - last edited 2020-09-08 03:49:46

@Xidd 

Good day.

Thank you very much for your time and patience.

We have already released the firmware which supports manually choosing the network.

If you need it, please refer to the following link:

MR200(EU) V3/V4, MR400(EU) V2/V3, MR6400(EU) V3/V4                          

https://static.tp-link.com/2020/202007/20200714/LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip

Archer MR600(EU)_V1:

https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip

Then, please go to basic>internet and choose the specific network band;

Thank you!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  3  
  3  
#10
Options
59 Reply
Re:Archer MR600 - 4G Bands selection-Solution
2020-02-19 18:22:55 - last edited 2020-02-20 12:20:35

Already sold my router because of this issue and bought an Asus 4g-ac68u router.

Can select the band now and speed is working like it should.

 

I would have bought the Huawei b715 but external antennas are behind the router so that was a no go for me because of narrow space where the router is.

 

So long TP-link and thanks for nothing.

Seriously, like 6 months and no support for this issue?

Never gonna buy your products again. 

Recommended Solution
  7  
  7  
#2
Options
Re:Archer MR600 - 4G Bands selection
2020-02-20 09:09:54 - last edited 2020-02-20 12:20:22

Hi @hmit  and all

 

We are sorry that this router cannot satisfy your needs in time, while I have to say, which is not an excuse, we have forwarded this request to our product engineers, while it is not easy to add a feature as long as there are some feedback reported; first of all, solid foundation of the similar request is necessary, second, we need to evaluate the importance and the feasibility to add new feature. 

 

Once we make a plan, RD team will take over and it is not a short time to release the firmware and test the performance; much more time will be needed; even though it seems like it is just a small change, but the whole layout needs to be considered; and round and round tests need to be done before the new firmware came out; We need ensure that the compatibility of different OS and carriers; the performance, including speed and stability is also important.  

 

Definitely, we totally understand your frustration and request, we will push forward the whole process. 

 

Good day. 

 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:Archer MR600 - 4G Bands selection
2020-02-20 12:28:09

@Kevin_Z 

 

I understand its not your fault. But please escalate this issue with your R&D department. I understand that "round and round tests need to be done before the new firmware came out", would you at least let us know the progress? It has already been 6 months, please at least tell us your R&D department has some progress right?

  2  
  2  
#6
Options
Re:Archer MR600 - 4G Bands selection
2020-04-18 15:14:50

Any update about this feature? it will be also very apreciated for french LTE band to select which one we want to force the router to connect, we do not have the same max speed depending of the band connected.... some of them depending where you are a really not good..

  

  2  
  2  
#7
Options
Re:Archer MR600 - 4G Bands selection
2020-08-31 12:20:47

I second this request totally.

Router started -> on the 'right' bands -> Performance good. At some point (no feedback that it happens or why), the device decideds to change the bands -> Pings & Throughput fall down. While when the 'right' bands are selected, i get at least 30-40Mbit/s down, with the change to different band(s) the throughput sinks to as low as just 5Mbit/s and pings go up to 1k ms and more.

  0  
  0  
#8
Options
#9
Options
Re:Archer MR600 - 4G Bands selection-Solution
2020-09-08 03:49:40 - last edited 2020-09-08 03:49:46

@Xidd 

Good day.

Thank you very much for your time and patience.

We have already released the firmware which supports manually choosing the network.

If you need it, please refer to the following link:

MR200(EU) V3/V4, MR400(EU) V2/V3, MR6400(EU) V3/V4                          

https://static.tp-link.com/2020/202007/20200714/LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip

Archer MR600(EU)_V1:

https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip

Then, please go to basic>internet and choose the specific network band;

Thank you!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  3  
  3  
#10
Options
Re:Archer MR600 - 4G Bands selection
2020-09-09 22:14:08
Hope, This will be an official version, since its downgraded the current firmware from 1.2 to 1.1. And upon checking this one has confidential. Mean this is beta release. Then suggestion for your dev, make this option also available in "Advance" tab. Hope the official version will be release. But so far now its good rather than nothing.
  0  
  0  
#11
Options
Re:Archer MR600 - 4G Bands selection
2020-10-09 17:58:10

@Sunshine 

 

Thanks for your efforts. I'm currently running version 1.17.0 0.9.1 v0001.0 Build 200526 on MR200v4. 

 

The functionality of selecting bands is not present. Nor in simple or advanced mode. Am I missing something? 

  0  
  0  
#12
Options
Re:Archer MR600 - 4G Bands selection
2020-10-15 11:46:19

@Sunshine Any updates for India region ??

  0  
  0  
#13
Options

Information

Helpful: 11

Views: 25482

Replies: 59

Related Articles