Help! Setting up Access Control
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Help! Setting up Access Control
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.17 Build 120426 Rel.29216n
ISP : Plusnet
Hello,
I don't suppose someone could help me out?
I have the router (as above/below) and I'm trying to limit access to my Vonage VOIP telephone.
Basically I only want to allow incoming access (or out as well, thats fine) between 10.30am and 6.30pm (and other rules based on days).
So what I have done is setup a rule with the Host set to the routers MAC address.
I then set the target to the IP of the Vonage box.
In the test, I've set "deny" all day Monday (today).
However, when I ring the phone number it still goes through and makes the phone ring (via the vonage box).
Any idea how I can basically disabled access to the vonage network box between X times of the day?
(I work from home and don't want the phone ringing when I'm in bed or out of hours)
TIA
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.17 Build 120426 Rel.29216n
ISP : Plusnet
Hello,
I don't suppose someone could help me out?
I have the router (as above/below) and I'm trying to limit access to my Vonage VOIP telephone.
Basically I only want to allow incoming access (or out as well, thats fine) between 10.30am and 6.30pm (and other rules based on days).
So what I have done is setup a rule with the Host set to the routers MAC address.
I then set the target to the IP of the Vonage box.
In the test, I've set "deny" all day Monday (today).
However, when I ring the phone number it still goes through and makes the phone ring (via the vonage box).
Any idea how I can basically disabled access to the vonage network box between X times of the day?
(I work from home and don't want the phone ringing when I'm in bed or out of hours)
TIA
Re:Help! Setting up Access Control
Thank you for the reply.
Do you mean set the Host to a blank IP Address and the Target IP as the Vonage box?
It won't allow me to leave the Host IP Address box blank.
Update:
Ive also tried it the other way around. Either way, the phone rings out and the phone receives incoming calls no matter what I put.
[URL=http://www.dumpt.com/img/viewer.php?file=568doo0732urgpo8zab8.png]
Update 2:
Following the guides I tried to deny access ALL day EVERY day from my PC to Google.
This DOES NOT WORK either. The rules are completely ignored no matter what they are, which way they go and which device.
Changing the default to "allow", BLOCKS ALL devices on the network. Adding a rule to contravene this DOES NOTHING
Do you mean set the Host to a blank IP Address and the Target IP as the Vonage box?
It won't allow me to leave the Host IP Address box blank.
Update:
Ive also tried it the other way around. Either way, the phone rings out and the phone receives incoming calls no matter what I put.
[URL=http://www.dumpt.com/img/viewer.php?file=568doo0732urgpo8zab8.png]
Update 2:
Following the guides I tried to deny access ALL day EVERY day from my PC to Google.
This DOES NOT WORK either. The rules are completely ignored no matter what they are, which way they go and which device.
Changing the default to "allow", BLOCKS ALL devices on the network. Adding a rule to contravene this DOES NOTHING
