Home Network Community > All Threads > Virgin Media Superhub 3.0 freezing when TP Link Powerline Adapter is plugged in
< All Threads

Virgin Media Superhub 3.0 freezing when TP Link Powerline Adapter is plugged in

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Virgin Media Superhub 3.0 freezing when TP Link Powerline Adapter is plugged in

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Virgin Media Superhub 3.0 freezing when TP Link Powerline Adapter is plugged in
Virgin Media Superhub 3.0 freezing when TP Link Powerline Adapter is plugged in
2020-04-02 13:01:10
Model: TL-WPA4220 KIT  
Hardware Version:
Firmware Version:

I've connected a TL-WPA4220 to my Virgin Media Superhub 3, I set the wirerless SSID and password on the tp-link extenders to match my Virgin Media network.  Everything seemed to be working fine but after a frew hours the superhub froze.  I couldn't acess the internet or the hubs home page from wireless or wired devices.  I powered the hub off and back on and after the reboot everything started working but the problem keeps on happening, every few hours the superhub needs rebooting.

 

I was wondering if the problem might be to do with the wireless networks interfeering with one another so I tured wireless off on the tp-link extenders but the problem persists.  Any ideas?  Thanks :)

  0      
 
  0      
 
#1
Options
2 Reply
Re:Virgin Media Superhub 3.0 freezing when TP Link Powerline Adapter is plugged in
2020-04-03 09:54:58

@Woodey 

 

How did you setup the wireless network name and password of TL-WPA4220? With the WPS button or the tpPLC utility.

 

Please unplug it for a while and take some time to test the stability of the main router. 

 

Try to change its wireless settings of the TL-WPA4220 with the tpPLC utility, give it a different name to do a test. 

https://www.tp-link.com/support/faq/1611/ 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Virgin Media Superhub 3.0 freezing when TP Link Powerline Adapter is plugged in
2020-04-05 07:59:31

Thanks @Kevin_Z.  I used the TP Link utility to configure the extenders, pressing the WPS button didn't work.

 

I've unpluggeg the TP Link devices and the main router has been stable for 24 hours.  I will try again later with a different network ssid on the TP Links and see what happens.

 

Thanks.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 2150

Replies: 2

Related Articles
Tp link m4 with virgin media hub 3.0
8347 0
AX11000 connected to Virgin Media Hub 3.0
2064 0
Deco M9 Plus with Virgin Media Hub 3.0
2952 0
virgin superhub
1021 0
virgin media hub 3 with tp link ax5400
1452 0
Virgin Media Hub 3.0 rebooting with TP-Link Deco S4
1987 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.