Problems with Port Forwarding on Archer MR200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Problems with Port Forwarding on Archer MR200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problems with Port Forwarding on Archer MR200
Problems with Port Forwarding on Archer MR200
2020-05-06 20:56:16
Model: Archer MR200  
Hardware Version: V4
Firmware Version: Firmware Version:1.9.0 0.9.1 v0001.0 Build 190307 Rel.54196n

I have connected my HP Printer to the router (wireless). The printer has IP 192.168.1.103 as shown below.

If I access the printer by typing the IP in the browser on my local network, everything works fine and HP Printer web page appears.

I have created Port Forwarding as shown below:

And my Public IP is:

 

When I type in 37.253.134.20:80 on a different computer on a different network, I expected to see the same HP Printer webpage as I see when entering 192.168.1.103 locally. But nothing happens...-.. Any tip on what can be wrong or further troubleshooting steps ?

  0      
  0      
#1
Options
2 Reply
Re:Problems with Port Forwarding on Archer MR200
2020-05-06 21:17:53
When on LAN and enter WAN IP:port, the web page appears normally. When I try to telnet LAN IP:port and telnet WAN IP:port, I get an error message: Can not open a connection to host on port 23.
  0  
  0  
#2
Options
Re:Problems with Port Forwarding on Archer MR200
2020-05-06 21:33:44
I guess the port 23 issues was related to firewall/telnet. On external net WAN IP 80 gives can not open a connection to host on port 80. However on internal net with LAN IP 80 gives a blank screen.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1680

Replies: 2

Related Articles