Home Network Community > All Threads > AX50/3000 much slower than Netgear R7800 side-by-side w/AX NIC
< All Threads

AX50/3000 much slower than Netgear R7800 side-by-side w/AX NIC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX50/3000 much slower than Netgear R7800 side-by-side w/AX NIC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX50/3000 much slower than Netgear R7800 side-by-side w/AX NIC
AX50/3000 much slower than Netgear R7800 side-by-side w/AX NIC
2020-07-12 03:13:41 - last edited 2020-07-14 03:29:27
Model: Archer AX50  
Hardware Version: V1
Firmware Version: 1.0.8 Build 20200426 rel.65338

I just installed the AX50 as a second AP (to be used exclusively with my AX devices), relegating the slower AC devices to my existing Netgear R7800. I am consistently getting wi-fi throughput of 100mbps more on the Netgear R7800, testing on a laptop with an intel AX200 card. The AX50 avgs 150-300mbps dl speed from farthest usage point (about 50ft away) to the closest (3 ft from antennas). The Netgear R7800 (An ac wifi router/AP) avgs 250-400+mbps with same laptop, same testing. I have tried auto settings, and manually choosing channels/width, but see no improvement. I bought this wifi router with expectation of AX increased performance on my 1gb service connection, and so far, I'm disappointed, of course that's it's much slower than my older  ac access point.

Please advise possible best config, problem resolution.  Thanks in advance.

-Lackosleep

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:AX50/3000 much slower than Netgear R7800 side-by-side w/AX NIC-Solution
2020-07-13 12:44:37 - last edited 2020-07-14 03:29:27

@Kevin_Z Thank you for quick reply. I think I may have found that it is simply that the AX50 antennas are not as strong as the R7800, as signal and resultant speed drops off much more rapidly as I move the test connection farther away from each. I have done a site survey and found I can move and isolate the AX50 near the dedicated AX devices and it will work reasonably well. The performance of the wired connections, although disappointing, are not as important - we will be using it for wi-fi AP exclusively. Thanks again.

Recommended Solution
  1  
  1  
#3
Options
3 Reply
Re:AX50/3000 much slower than Netgear R7800 side-by-side w/AX NIC
2020-07-13 10:21:25

@Lackosleep 

 

Hello, 

 

May I know your detailed network diagram that how each device is connected? What is the working modem of the AX50, is it in router mode or AP mode?

 

How about the negotiation speed on the laptop with the AX200 adapter when it is connected to the AX50 as well as it is connected to the Netgear R7800? You may refer to the below to confirm it:

How to check the associated/link speed on a wireless client

 

Do you have any other wireless clients to do a simple comparison test when connected to the AX50?

 

Additionally, what is the speed you may get when a computer is connected to the ISP modem directly with an Ethernet cable?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:AX50/3000 much slower than Netgear R7800 side-by-side w/AX NIC-Solution
2020-07-13 12:44:37 - last edited 2020-07-14 03:29:27

@Kevin_Z Thank you for quick reply. I think I may have found that it is simply that the AX50 antennas are not as strong as the R7800, as signal and resultant speed drops off much more rapidly as I move the test connection farther away from each. I have done a site survey and found I can move and isolate the AX50 near the dedicated AX devices and it will work reasonably well. The performance of the wired connections, although disappointing, are not as important - we will be using it for wi-fi AP exclusively. Thanks again.

Recommended Solution
  1  
  1  
#3
Options
Re:AX50/3000 much slower than Netgear R7800 side-by-side w/AX NIC
2020-07-14 03:30:24

@Lackosleep 

 

Hello, thanks so much for this update and valued info.

 

Hope everything will be good with this AX50 network, have a nice day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1322

Replies: 3

Related Articles
Connection to Bell 3000 HomeHub with AX50
2120 0
AX50/3000 request to add more options.
812 2
Very poor wifi through out my house with my Archer AX50/3000
305 0
Much slower speed than the router
5503 2
Router much slower than phone
1451 1
Archer AX50 AX 3000 Mbps unable to reconnect to modem
541 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.