Wireless adaptor causing lockup issues and preventing any major system installations
I bought this adaptor about a month ago and installed it after closing down my windows 10 system first .
After about 2 hours of issues it worked with the suggested intel AX200 driver.
I then had 2 wireless networks ( Asus default and this one )
I did wonder if I had to first disable the Asus default network adaptor which was not done the whole time.
Since this installation I have had all sorts of sofware lockups , eeven overheating of my system , which I did not at first put down to this adaptor.
Eventually I have this weekend tried for 3 days to either access a DVD boot disc system back up or reinstall Windows 10 from DVD with BSODs happening on each attempt
The main error shown failure with " netwtw08.sys" error which affects both new installations and backups which rely on network access.
I tried to disable the Asus default network adaptor in the Bios and put back the TP Link wireless adaptor which I had just removed .
However the same error showed and Windows 10 would not reinstall with the TX3000E adaptor in situ.
Please advise the correct position for installing this card as it does not seem to be the Intel driver that is the cause as it was not loaded at the stage of reinstalling the system.
If I cannot use this adaptorproperly it would clearly seem to be a waste of money .
System is Asus Rog Strix Z390E , 40 GB Ram 500 GB M2 drive, running for 15 months.