Home Network Community > All Threads > DNS Servers
< All Threads

DNS Servers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DNS Servers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DNS Servers
DNS Servers
2020-08-20 17:46:22 - last edited 2020-08-21 02:24:57
Model: Archer VR2800v  
Hardware Version: V1
Firmware Version: 1.2.0 0.9.1 v006d.0 Build 180410 Rel.611

The router is set after optical terminal on fiberoptics line. Internet is through PPPoE.

 

I'm running a raspberry pi with pi hole as a DNS server. if I use Raspberry IP (192.168.1.225) as DNS in the DHCP server setting of the router it has no effect, it seems that the provider DNS servers are used in practice. 
 

if I override the ISP provider's DNS servers from internet connection settings and use 192.168.1.225 the router crashes as it cannot manage having a DHCP client as DNS. During this also the default changes to 192.168.0.1.

 

How can I use raspberry pi as the only DNS server??

  0      
 
  0      
 
#1
Options
3 Reply
Re:DNS Servers
2020-08-25 09:41:07

@leka21 

Good day.

Thank you very much for your time and patience.

Is there any special reason that you want to use the IP address of raspberry pi, instead of the default DNS server from the internet provider?

Normally, the WAN DNS server address is not allowed to be in the same subnet as the LAN IP address;

So you might have to change it under the DHCP.

Since it changes the DNS server In the LAN, it could not be noticed on the router’s web interface, only on the LAN Devices’ IP parameters.

(After changing the DHCP, the router also requires a reboot.)

 

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:DNS Servers
2020-08-26 21:17:26 - last edited 2020-08-26 21:18:01

@Sunshine Thank you for the reply. I'm running local DNS server in Pi Hole to avoid ads during browsing. 
It seems that is working now, I'm not sure what has changed, I've tired same before. 

Is there any chance the IP address pool range 192.168.1.100 to 199 was blocking 225 that was set on raspberry ?

 

Thanks again 

  0  
  0  
#3
Options
Re:DNS Servers
2020-08-30 01:34:28
Good day. No, The IP address pool would not block 225 that was set on raspberry. Thank you
Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1122

Replies: 3

Related Articles
setting new dns servers fails to modify current dns servers
526 0
Change Guest DNS Servers
458 2
Different DNS Servers
599 0
DNS ISSUE
687 0
ISP DNS servers still present with custom DNS servers set for DHCP
678 0
[Archer VR200V] IPv6 DNS servers
992 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.