Home Network Community > All Threads > 11bgn mixed doesn't works well
< All Threads

11bgn mixed doesn't works well

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

11bgn mixed doesn't works well

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
11bgn mixed doesn't works well
11bgn mixed doesn't works well
2020-09-25 12:54:24 - last edited 2020-09-27 08:35:21
Model: TL-WR840N  
Hardware Version: V6
Firmware Version: 0.9.1 3.16 v004c.0 Build 171225 Rel.78450n

 Some days ago, I've created a thread talking about my problem with the wireless signal ( https://community.tp-link.com/en/home/forum/topic/228260 ), today I guess I found the problem, I changed the mode in Wireless > Basic Settings for 11bg mixed, and the problem was solved, but what's the difference between 11bgn and 11bg? Am I losing performance with 11bg? and what can I do to solve the problem with 11bgn?

  8      
 
  8      
 
#1
Options
1 Accepted Solution
Re:11bgn mixed doesn't works well-Solution
2020-09-27 08:34:29 - last edited 2020-09-27 08:35:21

@HebertCleiton 

 

Hi, thanks a lot for letting the community know your issue is resolved by changing the wireless mode from 802.11b/g/n mixed to 802.11b/g mixed. Good share.

 

As per your inquiry, 802.11b/g/n mixed means that the router is compatible with IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n wireless adapters, while 802.11b/g mixed will only allow the connection of IEEE 802.11b and IEEE 802.11g.

 

As for the difference between them, you may refer to some online forums like below:

https://en.wikipedia.org/wiki/IEEE_802.11

 

Thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  3  
  3  
#2
Options
2 Reply
Re:11bgn mixed doesn't works well-Solution
2020-09-27 08:34:29 - last edited 2020-09-27 08:35:21

@HebertCleiton 

 

Hi, thanks a lot for letting the community know your issue is resolved by changing the wireless mode from 802.11b/g/n mixed to 802.11b/g mixed. Good share.

 

As per your inquiry, 802.11b/g/n mixed means that the router is compatible with IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n wireless adapters, while 802.11b/g mixed will only allow the connection of IEEE 802.11b and IEEE 802.11g.

 

As for the difference between them, you may refer to some online forums like below:

https://en.wikipedia.org/wiki/IEEE_802.11

 

Thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  3  
  3  
#2
Options
Re:11bgn mixed doesn't works well
2021-04-23 05:23:59 - last edited 2021-04-23 05:25:22

@HebertCleiton 

 

TP-Link Wireless N Router WR840N

Model No. TL-WR840N

 

 

Firmware Version:0.9.1 4.16 v0001.0 Build 180614 Rel.40494n

Hardware Version:TL-WR840N v6 00000007

 

I'm facing the same issue I have changed the mode from 11bgn to 11bg but the issue is not resolved instead I'm facing less speed as compared to 11bgn. I have tried changing the channels to 1,6,11 but still Its not resolved. I have tried changing the dns to 8.8.8.8 and 1.1.1.1 but still the problem is not solved.

  42  
  42  
#3
Options

Information

Helpful: 8

Views: 34755

Replies: 2

Related Articles
AC1200 WiFi Range Extender doesn't works well
3380 0
Internet doesn't work as well as expected
949 0
Antivirus that works well with the adapter
490 0
TPlink WR1043ND Doesn't works well with iPhone6plus. Keep connect & disconnect
654 0
Wireless signal not working well, internet by wire is ok
963 1
Backhaul gives red led, but works well
360 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.