Access control troubleshoot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Access control troubleshoot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Access control troubleshoot
Access control troubleshoot
2020-09-28 19:20:36 - last edited 2020-09-30 17:10:44
Model: Archer C20  
Hardware Version:
Firmware Version: V5

Hi tplink community :-)

 

Hope I can receive some help to make my router work as expected.

 

This one is installed in a house for alone children aged till 18, and their tutors want to restrict internet access from 22 till 7.

 

I've enabled access control, with option deny in the first screen, with a schedule activated from 7 to 22, with no host, with target 192.168.1.1 (ip adress from the modem - gateway).

 

But it don't cut internet access after 22'.

 

Any tip for me?

 

Thanks a lot

  0      
  0      
#1
Options
5 Reply
Re:Access control troubleshoot
2020-09-29 06:35:26 - last edited 2020-09-30 17:10:44

@MULTID 

 

Hello, please refer to the below instructions to reconfigure the Access Control settings on the C20, ensure that the Host entry is the MAC address of your children's PC:

https://www.tp-link.com/support/faq/1724/

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Access control troubleshoot
2020-09-29 11:03:19

@Kevin_Z Thanks for your reply.

 

There are like 10 children in this house, and they move a lot. Each month new children are arriving.

 

So I cannot base the control on the mac adresses.

 

Do you see another solution? The internet access of all the connected users should be turned off in the night!

 

Thanks,

 

Damien

  0  
  0  
#3
Options
Re:Access control troubleshoot
2020-09-30 09:00:12

@MULTID 

 

I see, how about letting them connect to the Guest network, then you can set a schedule for the Access Time?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#4
Options
Re:Access control troubleshoot
2020-09-30 09:22:34

@Kevin_Z  Good idea, i'll try it! Thanks

  0  
  0  
#5
Options
Re:Access control troubleshoot
2020-09-30 17:01:52

@Kevin_Z I set it up but not sure it will work, I'll see this night.

 

When I choose "enable wireless schedule" then save, it disable the guest network???

 

So I let the guest netword enabled, but with wireless schedule disabled. And with my schedule hours of course.

 

 

 

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 512

Replies: 5

Related Articles