New Archer MR600 BSNL 3G No Signal Problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

New Archer MR600 BSNL 3G No Signal Problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
New Archer MR600 BSNL 3G No Signal Problem
New Archer MR600 BSNL 3G No Signal Problem
2020-10-25 19:00:33
Model: Archer MR600  
Hardware Version: V1
Firmware Version: Default One & Archer_MR600v1_1.1.0_0.9.1_200417-rel75138 Beta Version

I can able to Manually Select Two Bands in my 4G Simcards,

When i Insert BSNL 3G Network Simcard, It is Showing No Signal, Signal Strength is 0

 

Please Help me Mean while In my Other Devices Receiving 3 to 5 Signal Bars In Same Place,

 

Why I Unable to Use BSNL 3G Network,

Even in Manual Serach it only Detects Vodafone 3G Network..?

 

Why Pls Some One Help Me Sir..

  0      
  0      
#1
Options
5 Reply
Re:New Archer MR600 BSNL 3G No Signal Problem
2020-10-26 09:17:59

@dravid 

Have you also tried the official firmware?

 

Maybe you have "4G only" selected?

  0  
  0  
#2
Options
Re:New Archer MR600 BSNL 3G No Signal Problem
2020-10-27 19:40:42

@Baenz 

Thank You For Your Suggestion,

I Foud Out When I Tested Outside Home It Give Signal Strength 100%,

and It Gets RSSI = -67 dBm And It Connects to Band 1 and Working Normal Today,

 

 

If I Rise the Device About Celing Level It Receiving Signal Strength 25% and RSSI = -107 dBm and No Internet Connection.

Please See the ScreenShot Attached Sir.

 

Please Suggest Me Is My Device Antenna is Weak or Device Weak,

File:
Screenshot.jpgDownload
  0  
  0  
#3
Options
Re:New Archer MR600 BSNL 3G No Signal Problem
2020-10-27 19:42:28

@Baenz 

Sir

 

When I Testing Inside Home It is Behaving Worst, Singla Strength 0

and Nothing Else When I Placing in Table,

Where As My Mobile Please See the Attachment Sir

 

Where is the Problem Is My Network or TP-Link Archer MR600 Provided Antennas are Defective...?

File:
Mobile Signal Streng in Table.jpgDownload
  0  
  0  
#4
Options
Re:New Archer MR600 BSNL 3G No Signal Problem
2020-10-27 20:06:22

@Baenz 

For 4G Networks It Gives What I Expected Sir,

Speed is Decent,

Signal Stength : 100%

RSRP: -69 dBm

RSR: -7dB

SNR: 18.8dB

 

Please Tell Me The Attached Antenna is Working Properly or Not..

 

How To Get Good Signal in BSNL 3G Sir

File:
4G 100% Performance.pngDownload
  0  
  0  
#5
Options
Re:New Archer MR600 BSNL 3G No Signal Problem
2020-10-29 02:43:25

@dravid 

Good day,

Thank you very much for your time and patience.

Sorry for the delay.

Did you say that, only when it was put outside could the LTE signal get 100%; once put inside, LTE signal would drop to 0% no matter on 4G network or 3G?

Have you tried to factory reset the Archer MR600 to have a look

How long have you had the Archer MR600 and did the issue start out of the box?

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1734

Replies: 5

Related Articles