MR600 3G Signal dropping at random times

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MR600 3G Signal dropping at random times

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MR600 3G Signal dropping at random times
MR600 3G Signal dropping at random times
2020-10-30 00:45:00
Model: Archer MR600  
Hardware Version: V1
Firmware Version: latest

Just another thread to explain I too am on Three UK and have tried everything to stop this router from dropping the 3g signal (goes 75%, 50% 25% then 0%) then disconnects for a few minutes and reconnects.

 

This happens at total random times and I have literally changed all settings to try and solve this issue. I can only now come to the conclusion that this is 100% an issue with your router and hope it can be fixed by a firmware update. I am willing to test any beta firmware you may have as I cannot afford to buy another router and need this to work from home.

 

Here are my logs from a recent disconnect:

 

2020-10-30 00:36:06 [5] Httpd: Clear log.
2020-10-30 00:36:08 [6] Httpd: DNS 172.31.139.16 resolve succeed for dns.msftncsi.com
2020-10-30 00:36:08 [6] Httpd: DNS 172.31.139.16 resolve succeed for www.msftncsi.com
2020-10-30 00:36:08 [6] Httpd: NCSI response check succeed.
2020-10-30 00:37:00 [6] Httpd: DNS 172.31.139.16 resolve succeed for dns.msftncsi.com
2020-10-30 00:37:01 [6] Httpd: DNS 172.31.139.16 resolve succeed for www.msftncsi.com
2020-10-30 00:37:01 [6] Httpd: NCSI response check succeed.
2020-10-30 00:37:11 [6] Httpd: DNS 172.31.139.16 resolve succeed for dns.msftncsi.com
2020-10-30 00:37:11 [6] Httpd: DNS 172.31.139.16 resolve succeed for www.msftncsi.com
2020-10-30 00:37:11 [6] Httpd: NCSI response check succeed.
2020-10-30 00:39:13 [6] System: Device(7C:BB:8A:F0:74:B5) leaves 2.4G Wlan
2020-10-30 00:39:57 [6] 4G: USER: Now registrat on network 234 20, long_eons 3 UK short_eons 3 UK.

2020-10-30 00:40:07 [6] 4G: USER: Now registrat on network 234 20, long_eons 3 UK short_eons 3 UK.

2020-10-30 00:40:28 [6] 4G: USER: Now registrat on network 234 20, long_eons 3 UK short_eons 3 UK.

2020-10-30 00:42:34 [6] Httpd: DNS 172.30.139.16 resolve timeout for dns.msftncsi.com
2020-10-30 00:42:36 [6] Httpd: DNS 8.8.8.8 resolve timeout for dns.msftncsi.com
2020-10-30 00:42:39 [6] Httpd: DNS 172.30.139.16 resolve timeout for dns.msftncsi.com
2020-10-30 00:42:41 [6] Httpd: DNS 8.8.8.8 resolve timeout for dns.msftncsi.com
2020-10-30 00:42:44 [6] Httpd: DNS 172.30.139.16 resolve timeout for dns.msftncsi.com
2020-10-30 00:42:46 [6] Httpd: DNS 8.8.8.8 resolve timeout for dns.msftncsi.com
2020-10-30 00:42:49 [6] Httpd: DNS 172.30.139.16 resolve timeout for dns.msftncsi.com
2020-10-30 00:42:50 [6] 4G: USER: Now registrat on network 234 20, long_eons 3 UK short_eons 3 UK.

2020-10-30 00:42:51 [6] 4G: USER: The network disconnected, start autoconnect!

2020-10-30 00:42:51 [6] 4G: USER: Get user's profile now.

2020-10-30 00:42:51 [6] 4G: USER: GetCurrProf result is:  ipver:0  staticApn:0  authType:0  pkgName:three.co.uk  profname:three.co.uk  apn:three.co.uk  usr:  psw:  

2020-10-30 00:42:51 [6] 4G: ERROR: Bind mux port session 0 failed (0).

2020-10-30 00:42:51 [6] 4G: USER: Fail to connect to the network, start autoconnect!

2020-10-30 00:42:51 [6] 4G: USER: Get user's profile now.

2020-10-30 00:42:51 [6] 4G: USER: GetCurrProf result is:  ipver:0  staticApn:0  authType:0  pkgName:three.co.uk  profname:three.co.uk  apn:three.co.uk  usr:  psw:  

2020-10-30 00:42:51 [6] Httpd: DNS 8.8.8.8 resolve timeout for dns.msftncsi.com
2020-10-30 00:42:53 [6] 4G: USER: Now registrat on network 234 20, long_eons 3 UK short_eons 3 UK.

2020-10-30 00:42:54 [5] 4G: lte internet disconnected.
2020-10-30 00:42:54 [6] 4G: LTE connection down
2020-10-30 00:42:55 [6] 4G: ERROR: Bind mux port session 0 failed (0).

2020-10-30 00:42:55 [6] 4G: ERROR: Call end reason = 0.

2020-10-30 00:42:55 [6] 4G: USER: Fail to connect to the network, start autoconnect!

2020-10-30 00:42:55 [6] 4G: USER: Get user's profile now.

2020-10-30 00:42:55 [6] 4G: USER: GetCurrProf result is:  ipver:0  staticApn:0  authType:0  pkgName:three.co.uk  profname:three.co.uk  apn:three.co.uk  usr:  psw:  

2020-10-30 00:42:56 [6] 4G: USER: Now registrat on network 234 20, long_eons 3 UK short_eons 3 UK.

2020-10-30 00:42:57 [6] 4G: USER: Now registrat on network 234 20, long_eons 3 UK short_eons 3 UK.

2020-10-30 00:42:58 [6] 4G: USER: Now registrat on network 234 20, long_eons 3 UK short_eons 3 UK.

2020-10-30 00:42:58 [6] 4G: USER: Connected to the network!

2020-10-30 00:42:59 [6] 4G: ERROR: 0x0000004A QMI_ERR_INFO_UNAVAILABLE

2020-10-30 00:42:59 [6] 4G: ERROR: result=1, error=74

2020-10-30 00:42:59 [6] 4G: ERROR: QMI NAS Get PHY CA Info failed, ret = 0.

2020-10-30 00:42:59 [6] 4G: ERROR: 0x0000004A QMI_ERR_INFO_UNAVAILABLE

2020-10-30 00:42:59 [6] 4G: ERROR: result=1, error=74

2020-10-30 00:42:59 [6] 4G: ERROR: QMI NAS Get PHY CA Info failed, ret = 0.

2020-10-30 00:42:59 [6] 4G: LTE connection up
2020-10-30 00:42:59 [5] 4G: LTE internet connected.
2020-10-30 00:43:00 [6] 4G: USER: Now registrat on network 234 20, long_eons 3 UK short_eons 3 UK.

 

 

I am willing to try and test anything at this point as it seems to have gotten worse recently and is almost impossible to use the internet this way!  I have read through so many threads and posts of users with a similar issue. Please post here if you have this issue too so something can finally be done about this. This wasn't a cheap router and was bought on recommendation on being top class.

 

Pleas help! Anyone!

  0      
  0      
#1
Options
1 Reply
Re:MR600 3G Signal dropping at random times
2020-11-06 11:04:35

@BazGee 

Hi, thanks a lot for your time and patience.

Nice to see you again.

I have sent you a beta firmware via message and please have a check.

Please feel free to post here with further updated news.

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 668

Replies: 1

Related Articles