Archer MR400 - very good beta firmware but some more to do

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR400 - very good beta firmware but some more to do

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR400 - very good beta firmware but some more to do
Archer MR400 - very good beta firmware but some more to do
2020-10-26 11:40:24
Model: Archer MR400  
Hardware Version: V3
Firmware Version: 1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55

Hi TP Link,

I quite appreciate you made available a beta firmware for MR400 to allow band selection. In my case, this changed the situation from a bad router to a good one.

How ever it would be great if you can add some more functionalities that could be a great plus:

  • set a priority list for the bands, not only select a single one --> I can tell the router to use, for example, 7, then 1 then 20 in this order, coming back to the highest one as soon as possible
  • give the possibility to select the eNB ID to connect to;
  • suggest us some antennas to improve signal :)

 

Thank you very much!

  2      
  2      
#1
Options
1 Reply
Re:Archer MR400 - very good beta firmware but some more to do
2020-10-29 03:35:03

@Paoloc75 

Good day,

Thanks a lot for your kind feedback.

For the first two ideas, we would be happy to report the feedback to our engineers for further improvement.

For the last one, since this model is sold around the world so it is hard to get a global compatible antenna for it.

Sometimes, other users would share the experience after they changed the original antennas and you could have a look;

https://community.tp-link.com/en/home/forum/topic/219390

 

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options