How to set up a 4G router tp link M7450 as master and router TP link AC750 as slave

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to set up a 4G router tp link M7450 as master and router TP link AC750 as slave

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to set up a 4G router tp link M7450 as master and router TP link AC750 as slave
How to set up a 4G router tp link M7450 as master and router TP link AC750 as slave
2020-10-29 21:26:51 - last edited 2020-11-06 10:50:24

We have a TP link M7450 as 4G hotspot and want to connect a TP Link AC750 as slave so we can cable to ex sonos bridge and TV.

1. so TP Link have the incoming 4G and 3G signal and send wifi to the building and to improve signal and connect Sonos hifi and TV we need cable connection.

2. how do we set this up?

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to set up a 4G router tp link M7450 as master and router TP link AC750 as slave -Solution
2020-11-06 10:50:16 - last edited 2020-11-06 10:50:24

@Polarpirate 

Hi,

Thanks for your patience.

Sorry for the delay.

For the AC750, did you mean RE205, TL-WR902AC?

If it is the range extender, it does not require special settings.

And if it is 902AC, please refer to this link:

https://www.tp-link.com/support/faq/2031/

 

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:How to set up a 4G router tp link M7450 as master and router TP link AC750 as slave -Solution
2020-11-06 10:50:16 - last edited 2020-11-06 10:50:24

@Polarpirate 

Hi,

Thanks for your patience.

Sorry for the delay.

For the AC750, did you mean RE205, TL-WR902AC?

If it is the range extender, it does not require special settings.

And if it is 902AC, please refer to this link:

https://www.tp-link.com/support/faq/2031/

 

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:How to set up a 4G router tp link M7450 as master and router TP link AC750 as slave
2020-11-06 15:11:05

@Sunshine 

 

Hi Sunshine

No, I did mean your TP-link product M7450 NOT the other products you mean, unless you mean it is the same procedure?

:How to set up a 4G router tp link M7450 as master and router TP link AC750 as slave 

 

Thx for your help.

 

While I am awaiting the 5G router DECO from TP-link for sale on the Danish market, do I have a question.

1. can I insert a 5G sim card which also have 4G into the M7450 router? or the AC750 router??

 

best regards

 

Michaell

 

 

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1313

Replies: 2

Related Articles