Setting Router to 2.4GHz Channel

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setting Router to 2.4GHz Channel

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setting Router to 2.4GHz Channel
Setting Router to 2.4GHz Channel
2020-11-15 12:19:07
Model: TL-WA901ND  
Hardware Version:
Firmware Version:

I need to set the Router to 2.4GHz Channel for my wireless access point, so as to operate some lighting.

Can anyone please take me through, in layman's terms, how to do this?

many thanks.

  0      
  0      
#1
Options
7 Reply
Re:Setting Router to 2.4GHz Channel
2020-11-15 13:04:43

@likeasalmon 

 

Is this the scenario you are trying to configure ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Setting Router to 2.4GHz Channel
2020-11-15 13:51:47

@Ivaylo  No, sorry. I have it configured as an access point, which is what I want. I then want to access WiFi via the 2.4GHz channel, so as to control room logging via WiFi.

  0  
  0  
#3
Options
Re:Setting Router to 2.4GHz Channel
2020-11-15 17:32:57 - last edited 2020-11-15 17:34:17

@likeasalmon 

 

So far you've set it up as an AP. I presume you have configured the Wi-Fi already (on the TL-WA901ND).

Would you explain in more details, what are you trying to achieve ? Sorry, I didn't get your goal.

What would you like to have configured further ?

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Setting Router to 2.4GHz Channel
2020-11-15 17:52:10

@Ivaylo I assume that when using WiFi, the strongest channel is used, so it will automatically link in to the best channel. To control my room lights I need the WiFi channel to remain on 2.4 and not 5.2. I would like to configure the router to work only on channel 2.4.

  0  
  0  
#5
Options
Re:Setting Router to 2.4GHz Channel
2020-11-16 16:04:03

@Ivaylo I will be using an iPhone, with the switch being a Maxico Smart Switch.  The switch only supports the 2.4 network.

  0  
  0  
#7
Options
Re:Setting Router to 2.4GHz Channel
2020-11-16 17:05:52 - last edited 2020-11-16 17:16:03

OK, nowadays the majority of IoT devices are 2.4GHz only capable. That doesn't mean that you have to disable 5GHz band on your main router. You just have to connect your Maxico Smart Switch to the 2.4GHz network and start using it. At the same time you can still use the 5GHz network for your 5GHz capable devices.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#8
Options
Re:Setting Router to 2.4GHz Channel
2020-11-16 17:13:28

@Ivaylo Thank you. Very helpful. I will set it up this week and will let you know as to how it

goes. Once again, thank you.

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 2086

Replies: 7

Related Articles