Archer AX 50 Speed problem
I have problem with speed.
Provider LAN speed - Gigabit. 550 mb (world), 1000 mb (Ukraine).
Dynamic IP
With a direct cable connection (without a router), the speed is 2 times more (Speed test - 420-600 mb download, 800 mb+ upload).
PC:
Notebook - WiFi adapter Intel(R) Wi-Fi 6 AX200 160MHz
Windows 10 Pro
Smartphone:
POCO F2 Pro (support WiFi 6)
Why the router reduces the speed by 2 times according to Speedtest (adapters that support Wi-Fi 6 and 5 GHz mode are used)?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@tunyk When I connect to the router via LAN (flexible cable and PC port), the same problem with speed (it is 2 times less than when connected directly).
- Copy Link
- Report Inappropriate Content
Check and confirm the QoS is disabled on the router: launch the Tether app and go to Homecare page-QoS, check and ensure it is on the Standard Mode, then get back to the Clients' page, check all the clients connected to the router and ensure the High Priority is disabled.
Or you may simple reset the AX50 to the factory defaults and reconfigure it from scratch to confirm.
- Copy Link
- Report Inappropriate Content
@Kevin_Z All settings are correct. There is a problem with the device or firmware.
- Copy Link
- Report Inappropriate Content
@Kevin_Z I forgot to say that I found another problem, if you switch the router to 160 MHz, then on a laptop with an adapter (Intel(R) Wi-Fi 6 AX200 160MHz) it completely ceases to be displayed in the list of devices and the network disappears.
- Copy Link
- Report Inappropriate Content
160MHz has a 10-min TWDR Scan Time. This means that the 5GHz band will only show up after 10-min or so. Patience is a virtue when using 160MHz/DFS Channels.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1391
Replies: 5
Voters 0
No one has voted for it yet.