TL-WR941HP is dropping packets to wifi clients.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WR941HP is dropping packets to wifi clients.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR941HP is dropping packets to wifi clients.
TL-WR941HP is dropping packets to wifi clients.
2020-12-14 23:41:09
Model: TL-WR941HP  
Hardware Version: V2
Firmware Version: 2.0.2 Build 20191125

I'm getting dropped packets from devices to the TL-WR941HP. I can tell it's just on the wifi because the internal diagnostic show it working fine. It's intermittant and I don't see clear reasons for the issue.

 

From my computer:

 

ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=118 time=74.986 ms
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
64 bytes from 8.8.8.8: icmp_seq=3 ttl=118 time=73.152 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=118 time=304.583 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=118 time=255.889 ms
^C
--- 8.8.8.8 ping statistics ---
7 packets transmitted, 4 packets received, 42.9% packet loss
round-trip min/avg/max/stddev = 73.152/177.153/304.583/104.513 ms

 

From router:

 

PING 8.8.8.8 (8.8.8.8): 64 data bytes
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=1  time=62.543 ms
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=2  time=62.478 ms
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=3  time=62.572 ms
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=4  time=62.521 ms
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=5  time=62.545 ms
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=6  time=62.499 ms
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=7  time=62.572 ms
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=8  time=62.539 ms
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=9  time=62.511 ms
Reply from 8.8.8.8:  bytes=64  ttl=119  seq=10  time=62.499 ms

--- Ping Statistic "8.8.8.8" ---
Packets: Sent=10, Received=10, Lost=0 (0.00% loss)
Round-trip min/avg/max = 62.478/62.528/62.572 ms

  0      
  0      
#1
Options
2 Reply
Re:TL-WR941HP is dropping packets to wifi clients.
2020-12-29 08:29:59

@John_Lewis 

 

Hello, you may try to modify the wireless settings on the WR941HP first to get a stable Wi-Fi connection, such as changing the wireless channel to 1/6/11, channel width to 20MHz, then reboot the router and reconnect to the Wi-Fi to confirm.

 

BTW, you can also try to change the DNS server on the WR941HP to 8.8.8.8 and 8.8.4.4.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:TL-WR941HP is dropping packets to wifi clients.
2020-12-29 09:19:04

@Kevin_Z I'll try that.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 524

Replies: 2

Related Articles