wds TD-W9970 v3
Turktelekom company gave the modem.
Now I want to use this modem as a wireless extender.
I cannot update firmware.
There is no WDS menu.
There is no firmware update menu. How can I access the WDS menu.
model no: TD-W9970 v3 00000001
I can bridge it with a LAN cable. But I don't want to use cables.
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If it's not with a custom FW provided by your ISP these settings should be located as follows:
Enable WDS
FW upgrade
- Copy Link
- Report Inappropriate Content
Thanks.
I changed the config file. Now I'm connecting with my root password. But I can't see the WDS menu. as in your pictures. I think I should change the firmware.
Which firmware should I choose is based on my hardware version. Do you have any knowledge about this topic. hardware version is available on my share.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks for quickly answer.
Is it enough if I just install the below firmware. I'm asking for the first time I'm going to install firmware. sorry.
- Copy Link
- Report Inappropriate Content
Just look at bottom of your device - there should be a sticker - check the version. If it says (EU) and HW v3, then you can go ahead with the latest from 2020-03-10.
- Copy Link
- Report Inappropriate Content
I tried two firmwares. But not accept.
modem gave the message.
Error Code: 4503
Uploaded file was not accepted by the device.
I used Lan cable. not wirelewss network.
modem label is
- Copy Link
- Report Inappropriate Content
Even that the model and HW version are correct It looks like you have a customized FW uploaded on the device by your ISP (TurkTelekom).
Hence the reason it won't accept the stock FW from TP-Link.
What is your primary device router/modem ?
If you can use the TD-W9970 as a primary device and your other device with WDS, that's an option too.
- Copy Link
- Report Inappropriate Content
Thanks for the your solve idea. you are right. Turktelekom firmware is not accept original firmware. also hardwire is not included WDS. I opened WDS menu but can't receive wireless signal. not shown wireless signals. it only use output wifi signal.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2681
Replies: 8
Voters 0
No one has voted for it yet.