Powerline Adapter AV600 - Continuously Blinking Powerline LED
This has been going on for a day now. The powerline LED on the av600 powerline adapter keeps on blinking. I am connected to the internet, but it's really slow compared to my internet speed when the powerline LED wasn't blinking and was still. How do i fix this? It's not a very rapid blink, it's slow. I've tried reconnecting to the powerline adapter downstairs connected to my router several times but there is not change. Please help!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Its been a while since I used the AV600 but my best advice would be to move the powerlines close to eachother (same room if possible) and re-sync the devices by pressing the pair button on the bottom of both. As you say the "House" symbol should go solid ON
Hopefully then you should establish a strong connection, give it a few mins and try moving it back to where you want it placed.
I did have the AV500/600 range a few years ago and this happened every few months, just one of those things with AC1 homeplugs. The AC2 seems more stable that way
best of luck
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You could try leaving these disconnected overnight and attempt again tomorrow. I have heard people report that helps, something about static on the powerline.
Personally never had this but worth a try.
Im guessing you have the 2x nano wired plugs ? No Wifi?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 9290
Replies: 5
Voters 0
No one has voted for it yet.