Home Network Community > All Threads > TP-Link TD-W9970 v4 DMZ and PPTP VPN server do not work together.
< All Threads

TP-Link TD-W9970 v4 DMZ and PPTP VPN server do not work together.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link TD-W9970 v4 DMZ and PPTP VPN server do not work together.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link TD-W9970 v4 DMZ and PPTP VPN server do not work together.
TP-Link TD-W9970 v4 DMZ and PPTP VPN server do not work together.
2021-01-19 14:56:20 - last edited 2021-01-19 15:10:35
Model: TD-W9970  
Hardware Version: V4
Firmware Version: 1.0.0.0.9.1

Hi everyone. I have recently purchased a TP-Link TD-W9970 v4. When trying to setup the DMZ and PPTP server to work concurrently the following errors come up on the screen.

 

error 4633 - the current setting conflict with the Internet access of the PPTPVPN service.

error 4624 - function conflict with the DMZ host

 

In the meant time I have just learned error 4624 also comes up when trying to enable remote management (with DMZ enabled).

 

I haven't encountered this sort of problems with other routers. Any clues?

 

Regards, J.

  0      
 
  0      
 
#1
Options
2 Reply
Re:TP-Link TD-W9970 v4 DMZ and PPTP VPN server do not work together.
2021-01-27 07:29:17

@julianp 

 

Thank you for posting on the TP-Link Community.

 

If you want to set up a PPTP VPN Server on the W9970, please kindly refer to the below instructions to verify the settings on it, ensure the client IP address is in a different IP subnet:

https://www.tp-link.com/support/faq/1751/

 

This is a guidance to configure the remote management on the modem, you may have a reference also:

https://www.tp-link.com/support/faq/2186/

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:TP-Link TD-W9970 v4 DMZ and PPTP VPN server do not work together.
2021-01-30 22:26:05

Hi Kevin and thank you for your reply. I was/am aware of all the links you have mentioned. Yes, the VPN and DMZ (router) are on different subnets, 172.xxx.xxx.xxx and 010.xxx.xxx.xxx. It must be someting else. It looks like there is something wrong within the TD-W9970 firmware/software.

J

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1352

Replies: 2

Related Articles
TD-W9970 V4 USB not working
202 0
IPSec VPN on V4 TD-W9970
1002 0
TD-W9970 v4
931 0
TP Link TD-W9970 with seperate physical firewall
1132 0
How to change primary and secondary dns on TP Link W9970 V4
609 0
TD W9970 v4 no USB
685 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.