Home Network Community > All Threads > Archer AX1500 Standard 5G channel fails; Guest 5G working.
< All Threads

Archer AX1500 Standard 5G channel fails; Guest 5G working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX1500 Standard 5G channel fails; Guest 5G working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX1500 Standard 5G channel fails; Guest 5G working.
Archer AX1500 Standard 5G channel fails; Guest 5G working.
2021-02-20 17:45:20 - last edited 2021-02-26 01:32:21
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20201116 Rel. 57080(5553)

Interesting problem- The normal 5G Channel completely fails to connect- sudden onset problem.

 

Guest 5G works fine.

 

Anyone have a clue?  Firmware up to date, no heat issues.

 

StevenRN

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working: RESOLVED-Solution
2021-02-26 01:32:09 - last edited 2021-02-26 01:32:21

 

Kevin_Z wrote

@StevenRN 

 

Are the A71, S5E Tab and Oneplus 7T detecting the main 5G signal or not? Which 5G channel on the AX1500 now? You may try to change the 5G wireless channel to 36/44, then reboot the AX1500 to confirm.

 

Additionally, please check if the A71, S5E Tab and Oneplus 7T can connect to other 5G networks.

@Kevin_Z 

 

Ok- the complete factory reset worked.  Everything connecting normally now.

 

Darn those stray cosmic rays!wink

 

Thanks for your help- I relayed that to the engineer Ives as well.  Hope it doesn't spontaneously degrade again surprise

Recommended Solution
  3  
  3  
#9
Options
9 Reply
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working.
2021-02-22 03:43:02

@StevenRN 

 

Can you please explain this in more details "The normal 5G Channel completely fails to connect"? Does this mean the 5G drops and cannot connect back on the devices? How often does this happen? You may try to modify the 5G wireless settings on the AX1500, such as changing the channel to 36 or 48, channel width to 40MHz, security to WPA2-PSK, AES, then reboot the AX1500 to monitor.

 

When did this issue happen? Since the purchase or it happens recently? Any change in the router firmware or network?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working.
2021-02-22 04:22:22

@Kevin_Z 

 

Ok.  There are 2 SSID's I can access 5G on.  One is the default channel, the other is the "guest" channel, which has a different SSID.

 

I was using the Default SSID for 5G access.  Now, it displays its name on my phone, let's say, but will not connect.  I had been using a tablet all day on that Default SSID, 5G.

 

The tablet lost connection.  I couldn't connect to the 5G I've been using for months.  Nothing connects.

 

I turned on the "Guest" 5G.  It works just fine.  That puzzled me.

 

Then, I tried changing, on the DEFAULT SSID 5G the settings for channel width and number, and it connected for a few seconds to my phone, and dropped.

 

The GUEST SSID 5G works fine, even set to the same channel and width as the Default, or any other channel and width, as I'd expect.  

 

If I turn off the GUEST SSID, the Default SSID still wont connect under any combination of channels or widths or powers.  I've rebooted, reset, and the firmware is correct and up to date.  There's nothing I can think to do to get the Default SSID 5G to work again.

 

The same thing has now happened with the 2.4 band; the Default SSID won't work at all, and the GUEST mode 2.4 works fine when enabled.

 

I use WPA2-PSK AES.  Guest channels, when enabled, work.  Regular SSID's won't connect at all.  I don't know how much better I could explain it.

  0  
  0  
#3
Options
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working.
2021-02-22 05:34:49

@StevenRN 

 

Thanks for the quick reply and detailed info. When you tried to connect to the main 5G or 2.4G network on the phone or tablet, was there any error message, such as cannot connect...?

 

Please try to create a different network name for the 5G network again, ensure it is different from the old name, then reboot both the AX1500 and the tablet or phone to confirm.

 

BTW, the tech team was made aware of your issue, they will likely reach out to you via email to continue to troubleshoot your issue.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working.
2021-02-23 17:45:27

@Kevin_Z I'll give that a shot, Kevin; thanks for any ideas.

 

I don't see any particular error messages pop up.  I'll update you after I try what you've asked.

 

Thanks,

 

Steve

  0  
  0  
#5
Options
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working.
2021-02-23 18:33:03 - last edited 2021-02-23 18:35:44

@Kevin_Z 

 

Hi Kevin.  I did all the reboot things and changing channel names, etc.

 

Now I'm finding all my computers connect to the standard channels, both 2.4 and 5G.

 

None of my Android devices do.  Kinda bizarre; I didn't assign any MAC addresses in the router settings.

 

Seems like the problem is in Android?  I know I just had Android 11 upgrade on my A71, my S5E Tab and Oneplus 7T are on 10 and both only connect to the guest channel now.

 

Steve

  0  
  0  
#6
Options
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working.
2021-02-24 06:54:31

@StevenRN 

 

Are the A71, S5E Tab and Oneplus 7T detecting the main 5G signal or not? Which 5G channel on the AX1500 now? You may try to change the 5G wireless channel to 36/44, then reboot the AX1500 to confirm.

 

Additionally, please check if the A71, S5E Tab and Oneplus 7T can connect to other 5G networks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#7
Options
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working.
2021-02-26 01:07:18

 

Ok.,

 

Turning off security on the Default channels allows the Android devices to connect.  (except the google home stuff, they require security, so they have no access)

,

Turning on security on the guest channels will not allow any of my android devices to connect ( A71, Oneplus 7T, S5E, Tab A 10" 2016, none of the Google home devices I have sprinkled around the house (home, homemini, chromecasts, etc.)

 

It's bizarre.  Access control is off.  Renamed everything and turned off security, everything (except google home devices, which require security) connects just fine, both channels.

 

Renamed the default channels.  Rebooted.  Turned on wpa2/wpa2psk, both in AES and TKIP/AES modes.  No Android (including my neighbor's G7) will connect.  

 

The only thing I can think of now is to do a total reset and start fron scratch.  I'll let you know how that goes.

 

Steve

Kevin_Z wrote

@StevenRN 

 

Are the A71, S5E Tab and Oneplus 7T detecting the main 5G signal or not? Which 5G channel on the AX1500 now? You may try to change the 5G wireless channel to 36/44, then reboot the AX1500 to confirm.

 

Additionally, please check if the A71, S5E Tab and Oneplus 7T can connect to other 5G networks.

@Kevin_Z 

  0  
  0  
#8
Options
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working: RESOLVED-Solution
2021-02-26 01:32:09 - last edited 2021-02-26 01:32:21

 

Kevin_Z wrote

@StevenRN 

 

Are the A71, S5E Tab and Oneplus 7T detecting the main 5G signal or not? Which 5G channel on the AX1500 now? You may try to change the 5G wireless channel to 36/44, then reboot the AX1500 to confirm.

 

Additionally, please check if the A71, S5E Tab and Oneplus 7T can connect to other 5G networks.

@Kevin_Z 

 

Ok- the complete factory reset worked.  Everything connecting normally now.

 

Darn those stray cosmic rays!wink

 

Thanks for your help- I relayed that to the engineer Ives as well.  Hope it doesn't spontaneously degrade again surprise

Recommended Solution
  3  
  3  
#9
Options
Re:Archer AX1500 Standard 5G channel fails; Guest 5G working: RESOLVED
2021-02-26 05:48:52

@StevenRN 

 

Thanks for the update, glad to hear that you figured it out finally.yes I previously thought you reset the router already in your first post, it's interesting a second reset helps.surprise

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options

Information

Helpful: 1

Views: 1285

Replies: 9

Related Articles
AX1500 5G Problems, sometimes stops working
1389 0
archer t2e 5g
610 0
archer ax10 no funciona 5g
596 0
Problems with the archer ax1500
2472 0
AX1500 updated firmware, where is the wireles channel change?
985 0
AX1500 5G no longer working
283 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.