Problem connecting Samsung, Apple devices to 5G network
TP-Link Archer C6 v3.2
Problems as follows:
• Smart Connect keeps switching network for Samsung device, disabled it
• Separately named SSIDs for 2G and 5G network
• Vivo device was able to connect to 5G network without any issue
• Samsung A30 and iPhone X gave two different errors: Samsung - couldn't obtain IP address, Apple - No internet
• Tried to make IP static for Samsung, device connected to router but gave same error as Apple's, No internet
Purchased 2 days ago...
Also I have this WiFi adapter for my desktop Tp-link Tl-wn725n Wi-fi Receiver 150 Mbps Wireless Nano Usb Adapter
I know it's 2G but it is very slow, like I get 46-50Mbps on my smartphones but 0-12Mbps on desktop, please provide suggestions. Thank you!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Ignore "Sharing Network" , that's FW dependent.
Try setting Channel to Auto, disable airtime fairness feature and enable MU-MIMO feature. Then test again.
Do you use any special feature like access control or IP MAC Binding on the router ? If you do, disable them and test again.
- Copy Link
- Report Inappropriate Content
Thank you for your help!
It was Access Control, the MAC address of my device had changed so it wasn't able to identify and therefore denied access. So I guess I'll have to register both MAC addresses and work accordingly.
Thank you once again!
- Copy Link
- Report Inappropriate Content
Try these wireless settings:
Then reboot the router so the wireless devices can re-connect and test if that will resolve the issue.
- Copy Link
- Report Inappropriate Content
Thank you for your response!
Our settings are pretty much the same except I can't find "Sharing Network" next to "Enable Wireless Radio".
Here is a shot:
Note: Network works perfectly on Vivo but has issues on Samsung A30 and iPhone X
Thanks once again!
- Copy Link
- Report Inappropriate Content
Ignore "Sharing Network" , that's FW dependent.
Try setting Channel to Auto, disable airtime fairness feature and enable MU-MIMO feature. Then test again.
Do you use any special feature like access control or IP MAC Binding on the router ? If you do, disable them and test again.
- Copy Link
- Report Inappropriate Content
Thank you for your help!
It was Access Control, the MAC address of my device had changed so it wasn't able to identify and therefore denied access. So I guess I'll have to register both MAC addresses and work accordingly.
Thank you once again!
- Copy Link
- Report Inappropriate Content
Keep in mind that if your phone MAC addresses are randomized that will happen again.
You can read more on that here - https://blog.elevensoftware.com/how-mac-address-randomization-can-affect-the-wifi-experience
If you want to use access control feature then better use your phone MAC instead.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 872
Replies: 5
Voters 0
No one has voted for it yet.