Windows remote desktop doesn't work - virtual server has been set
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi!
Just changed to a new ISP (Internet Service Provider) to another. Our new ISP's router's set to bridge mode, so I put a TP-Link after that.
I set the standard port in the virtual server section to allow the remote desktop service to reach the server PC. But it doesn't work from outside of the office.
We can connect to the same server from the local network.
The server PC has a dedicated IP address, the port forward (virtual server) destination is that IP address, enabled TCP/UDP as well, and set the port to 3389.
Nothing happens... Before the ISP change it work well, never had been any problem with that! There is no change on the server PC.
Can anyone help mi to solve this issue?
Thank you!
GSTLeslie
Hello @terziyski !
You were right! I had to ask the ISP to set my IP to a public one! Now it works fine! 
GST_Leslie
Hello @terziyski !
You were right! I had to ask the ISP to set my IP to a public one! Now it works fine!
GST_Leslie