Archer MR200 - virtual Servers doesn't work
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR200 - virtual Servers doesn't work
Model : Archer MR200
Hardware Version :
Firmware Version : 0.9.1 0.0 v004a
ISP :
Hello!
I want to use my brand new mr200 to connect from extern to my home network. So i set up no-ip.com and virtual servers for openvpn, ssh and for testing http ( with port forwarding from 81 to 80). All 3 servers are running on a orangepi and I can connect to the servers from internal LAN direct to the IP of the orangepi. But i cannot connect from external to the servers. I only can connect from external to the webinterface of the MR200. The destination IP in the virtual server configuration is the IP address of the orangepi. Ports are from 1194 to 1194, 22 to 22 and 81 to 80
So does anybody know why it doesn't work?
Greetings Reinhard
Hardware Version :
Firmware Version : 0.9.1 0.0 v004a
ISP :
Hello!
I want to use my brand new mr200 to connect from extern to my home network. So i set up no-ip.com and virtual servers for openvpn, ssh and for testing http ( with port forwarding from 81 to 80). All 3 servers are running on a orangepi and I can connect to the servers from internal LAN direct to the IP of the orangepi. But i cannot connect from external to the servers. I only can connect from external to the webinterface of the MR200. The destination IP in the virtual server configuration is the IP address of the orangepi. Ports are from 1194 to 1194, 22 to 22 and 81 to 80
So does anybody know why it doesn't work?
Greetings Reinhard