WPA/WPA2 ENTERPRISE Radius auth does not seem to work on AX6000
We currently use the configuration below with a Mikrotik router but that does not work with AX6000 using the conf below. The log we see in the radius server is:
Error Message
mschap: FAILED: No NT/LM-Password. Cannot perform authentication
This seems to be a bug as all these parameters below are correct. Once again, when we use Mikrotik we can login with user/pass to authenticate into wi-fi without any issues
Can anyone help me?
Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
It seems that you missed configuring a particular parameter on the radius server, and you have figured it out already. Congratulations.
Since the issue was resolved already, we will close this topic then.
If anyone encounters a similar issue when connecting to a radius server with WPA/WPA2-Enterprise on the router, please review all the settings on the radius server carefully, ensure you didn't miss anything that is important for the connection.
- Copy Link
- Report Inappropriate Content
Have you tried these security settings:
If the above settings don't work for you, then look at the following list - it may lead you to the root cause.
https://marc.info/?l=freeradius-users&m=128626292908052&w=2
- Copy Link
- Report Inappropriate Content
It seems that you missed configuring a particular parameter on the radius server, and you have figured it out already. Congratulations.
Since the issue was resolved already, we will close this topic then.
If anyone encounters a similar issue when connecting to a radius server with WPA/WPA2-Enterprise on the router, please review all the settings on the radius server carefully, ensure you didn't miss anything that is important for the connection.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2062
Replies: 2
Voters 0
No one has voted for it yet.