Home Network Community > All Threads > How to change default http port from 80 to 8080.
< All Threads

How to change default http port from 80 to 8080.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to change default http port from 80 to 8080.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to change default http port from 80 to 8080.
How to change default http port from 80 to 8080.
2021-09-21 11:09:12
Model: Archer C6  
Hardware Version: V3
Firmware Version: V1.0.10

Hi guys, 

 

I want to know from where I can change default http port to access the router which is 80 to something else. I have an app which uses port 80 and it is conflicting with my router ip. 

When I try to access that app via port forwarding it is opening my router page. So I though if I change my router default port from 80 to 8080 then I will be able to access my app on port 80 without any conflict. 

 

App -> http://192.168.0.10

Archer C6 - > http://192.168.0.1:8080

 

Can someone please help me with this. I am not able to find settings to change default web port for router itself. 

 

Thanks. 

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:How to change default http port from 80 to 8080.
2021-09-21 15:33:17 - last edited 2021-09-21 15:52:49

@IPSecGuy 

 

I doubt there is a setting to change the port of the Archer C6's router webpage. At least on the TP-Link routers I have worked with there is no way to change it.

 

Are you trying to access that App, which is running on a device with IP address 192.168.0.10 inside your network, from the Internet? Do you access that App via "http://[your public IP address]"?

 

 

Edit: I just noticed that in the old TP-Link GUI that was used in their routers until roughly 4-6 years ago it was possible to change to port for remote management (GUI access from the Internet).

  0  
  0  
#2
Options
Re:How to change default http port from 80 to 8080.
2021-09-21 17:57:24

@IPSecGuy 

 

Change these settings on your router and check if that works for you:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 4976

Replies: 2

Related Articles
Change default port of 80 on TD-W8968
539 0
AX23 change default HTTP management port
1280 0
Http 80 port on on x60
272 0
HTTP forwarding on a non-80 port
642 0
Como cambiar puerto 80 por 8080
448 0
Archer AX55 remote management with HTTP port 80 non available
1822 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.