connection lwan -> lan blocked unwanted
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
connection lwan -> lan blocked unwanted
Region : Netherlands
Model : TL-WDR4300
Hardware Version :
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : tele2
Hi,
I am using the WDR4300 as AP only.
On the wifi-lan I disperse IP-adresses with dhcp. I have no nat settings.
Lan ip-range is 172.16.80.0, wan ip-range is 192.168.1.0
The wdr4300 has ip-adresses 192.168.1.251 (wan, static ip) and 172.16.80.80 lan/wifi
Firewalling and nat are Off
However, when I try to connect from a non-wifi host to a wifihost (from 192.168.1.2 to 172.16.80.106, port 22 or 80 or 9091) the traffic is blocked at the router.
When I connect form one wifi-host to the other (172.16.80.4 to 172.16.80.106) this is no problem.
My pc has the route to 172.16.80.0 via 192.168.1.251 and in tcpdump I see that traffic for 172.16.80.106 travels via 192.168.1.251
Can I get to a console to tcpdump or see logs by command prompt? Is this a known error?
Model : TL-WDR4300
Hardware Version :
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : tele2
Hi,
I am using the WDR4300 as AP only.
On the wifi-lan I disperse IP-adresses with dhcp. I have no nat settings.
Lan ip-range is 172.16.80.0, wan ip-range is 192.168.1.0
The wdr4300 has ip-adresses 192.168.1.251 (wan, static ip) and 172.16.80.80 lan/wifi
Firewalling and nat are Off
However, when I try to connect from a non-wifi host to a wifihost (from 192.168.1.2 to 172.16.80.106, port 22 or 80 or 9091) the traffic is blocked at the router.
When I connect form one wifi-host to the other (172.16.80.4 to 172.16.80.106) this is no problem.
My pc has the route to 172.16.80.0 via 192.168.1.251 and in tcpdump I see that traffic for 172.16.80.106 travels via 192.168.1.251
Can I get to a console to tcpdump or see logs by command prompt? Is this a known error?
