AP vs router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AP vs router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AP vs router
AP vs router
2021-10-31 02:32:15

Why does an access point with the same spec cost much higher than a router? For example WA901N is more pricey than WR940N, AP has only 1 port LAN and clients have to be connected wirelessly, a router has 4 ports and clients can get connected wirelessly and via LAN

  0      
  0      
#1
Options
8 Reply
Re:AP vs router
2021-10-31 18:36:01

@nyonyo 

 

In answer to your question, the simple answer is capacity and performance.

 

Routers are "jack of all trades, masters of none"... namely they offer WiFi.. Internet.. Switches all built into one device

Access Points are specifically designed for WiFi..   The master of doing one thing! 

 

Say each device costs $50, a router is a $10 switch, $10 wifi, $10 modem etc.. cheap at a lot of things... the AP is a $50 WiFi...

 

If you have 6-10 devices you likely wont see a difference, but when you add more devices and download a lot more the Router WiFi will slow WAY before the access point will.

 

Sky TV routers are a good example of this, they struggle with anything over 20 devices on the WiFi.   Connect an AP and you can easily do 50+ devices! 

 

 

  0  
  0  
#2
Options
Re:AP vs router
2021-11-01 03:16:23
oh..I see so AP is a specialist and better for wireless connections and router is for all-around connections, but why a router can be changed into AP mode and an AP can't be changed into a router? what's the use of changing a router into an AP? if the quality is just so-so? in AP mode will a router deliver a better signal?
  0  
  0  
#3
Options
Re:AP vs router
2021-11-02 13:18:23

@nyonyo 

 

Q: " AP can't be changed into a router ?"

A: Dedicated APs are purposed to work as AP only. (" I see so AP is a specialist and better for wireless connections ")

Q: " what's the use of changing a router into an AP? "

A: The main purpose is to avoid the double NAT in your network if you already have another main router and you have a fewer wi-fi clients.

See the difference between a device in wireless router and AP mode.

Q: " in AP mode will a router deliver a better signal? "

A: No. It would be the same as in wireless router mode.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:AP vs router
2021-11-09 14:13:08
If I change a router into AP mode, should I connect the internet cable to WAN or LAN port?
  0  
  0  
#5
Options
Re:AP vs router
2021-11-10 06:38:48

@nyonyo 

 

Here's how to set a wireless router in AP mode.

For Case 1 - use LAN to WAN port connection.

For Case 2 - use LAN to LAN port connection.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:AP vs router
2021-11-13 09:45:17
what if I connect to WAN port in case 2?
  0  
  0  
#7
Options
Re:AP vs router
2021-11-13 11:50:58 - last edited 2021-11-13 11:52:46

@nyonyo 

 

If you connect to WAN port (Case 2)  you won't be able to set its LAN IP address in the same subnet as the main router - hence it will work as a router.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#8
Options
Re:AP vs router
2021-11-14 01:53:01
thank you
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 934

Replies: 8

Related Articles