bad connection between m5 decos
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Have a deco m5 3 pack installed on a farm house.
Walls are from wood not from concrete.
Now i see that the connections between the decos are very low, 1 bar yellow.
The deco's lose connection by time.
When i place more m5 decos between the decos then the signal is better, but in need to place a deco every 5 meters.
I also tried to place a m9 but thats not much better.
The farm is 2 floors but long, i think 25 meters.
I also tried to put the decos first floor, second floor, first floor, second floor etc but also not better.
Reset and update al decos also not a solution.
Deco's looks fine because setup with no problems.
So far i cant find other devices that can disturb the signal.
It seems a little bit strange that i need to put a deco every 5m, i expect more signal.
I dont know what to do now to solve this problem ...
I live in regular US style house with wooden floors and drywall for interior walls. The distance between one of my Satellite Deco M5 and Main Deco it is connected to is about 7 meters, and they are on different floors. I am getting two blue bars for that Satellite Deco:
Speedtest on smartphone connected to that Satellite M5 provides results in the range of 100Mbps to 200Mbps.
Each house is different, of course.
Where is your Main Deco M5 located: in the middle of the farmhouse, at one of corners, on the first floor, on the second floor?
With three Deco, one Main and two Satellite, do both Satellite Deco connect to Main Deco? When you add more Satellite Deco, do each of them connect to nearest Deco or all connect to Main Deco?
Can you put Ethernet cable(s) through the house? When wired, Deco M5 provide much better WiFi performance.